Bump, anyone try one on a Speed Concept yet?

I'm waiting to see someone take the bullet first. =)

I just mounted it to the B10. I couldn't get the reg VR one over here in germany, so I ordered the DA version. It's not that close to the seat post like it's supposed on the DA but it looks goin fine.
I was thinking to dremel the inner shelf away but wasn't sure if it's still strong after doin this.
https://www.dropbox.com/...3euqoym/DAbottle.jpg
Tried drinking and it was easier than it seemed.

---

-shoki

Bump for the speed concept people looking to see if this thing works or not!

 Still waiting over here. I dunno, but why has the company taken so long to make a bottle available to an SC owner. I'm sure a few bottles would have been sold by now if a picture was available.

I'm picking up a vr from someone in the classifieds. As soon as I get It ill post pics!

Any updates on the aero bento box?

Hi every body,

i've bought a cannondale sllice 105 in 2011 and i'm going to buy the thorans VR system but i really don't know if it can be mounted on my cannondale. Anyone has tried it or have a pic of this installation?

Thx a lot

Time for a SHOOT OUT!

---

---

After some customization, I got one of these on my Shiv TT. I had to purchase the Felt version of the mount and the stealth bottle. I anchored it to the seat tube by protecting the frame, then using the velcro strip which came with the mount to secure it. It's also secured on the bottom tube by a screw drilled through the side. I may have to reinforce it with a washer, but it's tight and the plastic is as thick as the mounting area.

The one downside is that you cannot use this setup for liquids. I'm using it for a flat kit. The cut out is over the mounting screw so that it fits snug. I also used double sided tape, strong stuff, to secure the flat kit to the mount so that there's no wobbling on roads or in wind.

---

_________________________________
Fitness, Like Life, Is a Journey!
http://www.trifitcoaching.com

Can you show a picture of the inside - how you are using a bottle as a flat kit? I'm having conceptual problems.

As you can see, I had to cut out a wedge. You then stuff you spare tubes, tire levers, and whatever else inside. You can also see where I drilled the hole. The tape is the two sided which I mentioned and keeps the water cage from rattling.

---

_________________________________
Fitness, Like Life, Is a Journey!
http://www.trifitcoaching.com

Here's mine, I love it.

http://forum.slowtwitch.com/...ing=mclaren;#4533941

---

If you are sure you will fail, or convinced you will succeed, you are probably right.....

Huge help!!! Thank you!!!

Bump for speed concept...again.

---

Primum Non Nocere, except to Kempy!

I want!!!!!

---

__________________________________________________
Official Polar Ambassador
http://www.google.com/...P7RiWyEVwpunlsc2JtQQ

I have a Cervelo P5 SIX. Any pictures of this bottle on a P5? Since there are no bosses on the seattube and the P5 does not have a "V" angle between the downtube and the seattube. Thus, how do you install? There are two bosses on the downtube, but if you install the bottle in that possition there is large gap between the bottle and the seattube. It looks odd. Any help would be great. Kye

Hi Hans,

Any chance you could provide weight of the complete system ("cage" and bottle ?) ?

Also do you have a rear or front view of the "cage/mount" without bottle to see where the holes are located ? In case we need to lower the bottle on seat tube is it possible to drill some new 5.5 / 6mm holes or the bolt are hidden in a specific way that makes it impossible to create different holes ?

Thanks for your help.

any update on a Torhan on a speed concept?

Should be no issues an SC with the Universal Vr.

I'll try to get a pic.

Hans

---

Hans Bielat
TorHans LLC Co-Founder, Owner, Chief Innovation Officer
http://www.torhans.com

Will it fit on a 2010 frame?

---

Human Person

Which frame????

---

Hans Bielat
TorHans LLC Co-Founder, Owner, Chief Innovation Officer
http://www.torhans.com

It's a 2010 Felt DA.

---

Human Person

If that is the current design then buy the DA specific from Felt. If it's not then buy the universal Vr from one of our retailers. Should fit well.

Hans

---

Hans Bielat
TorHans LLC Co-Founder, Owner, Chief Innovation Officer
http://www.torhans.com

The 2010 is the frame before the current design. I'll reach out to felt to see if they have any insight. Thanks.

---

Human Person