Login required to started new threads
Login required to post replies
Frames for the lifetime of the original owner (except forks, the Session, Scratch, Slash, and Ticket model frames, and the swing arms on all full suspension bicycles)
Session (carbon) model frames and swing arms
RIDE+ motor, controller, & battery pack (or 600 charges, whichever comes first)
All original Bontrager forks, rocker links, parts and components (except consumables such as
tires and tubes)
Pad stack and reach are 555mm and 410mm to the back of the pad. Will I fit well on a size small? :)
Thanks in advance!
Surprisingly, most Gen1 parts can be sourced from Wisconsin. I ordered a 10x100 stem (Long-Low equivalent) about 12 months ago, took a while but my country's distributor got it in their next shipment. Same with a new base bar when the old one had a bolt corrode it in.
ZONE3 - We Last Longer
If you do try this, you could look at the bottom end threaded part- Itâ€™s actually a recessed brake caliper nut. Look for a longer one if that would solve things.
The bolts were hardened steel, so make sure youâ€™re getting something equivalent. There are different pitches for metric threads, but these are standard.
For the 5mm difference have you considered a thicker pad on one side? Also, since the cups rotate, some of it could be made up with that.
Developing aero, fit and other fun stuff at Red is Faster
Trek speed concept 2018, Size large(i'm 6.0/183cm) u5 vapor coat, HED jet black 9 + black disc, vittoria corsa speed open TLR 25mm, silca latex tubes, carbon seatpost/seat, PowerTap P1 pedals. Thank you all guys to help me to chose bike/wheels/tires/tubes.
Should have been caught by LBS during assembly. Same thing with your stem. Iâ€™d be asking the bike shop some hard questions why those issues werenâ€™t caught.