Hmmm.... I'm not seeing it on their page. Josh PM'd me about two months ago asking if I was looking for a gravel bike (which I was, he probably saw me inquiring on a thread elsewhere here) and sent me some specs which looked good to me (particularly the threaded BB) so I just PayPal'd him directly. I'll see if I can get him to chime in.
I'm going with GXP cranks (SRAM Force 1... they can be found pretty cheap) and a direct mount chainring (trying to find a 48t, haven't found anything bigger than 42t yet). I'll probably go with an 11-32 cassette in the rear, Shimano Ultegra 8000 RD, Ultegra hydraulic brifters and brakes, and.... drumroll... a bottom bracket with angular contact bearings.
https://wheelsmfg.com/...m-truvativ-grey.html This route has failed for so many but it makes so much sense in my head with a GXP crank and the preload washer. Time will tell. If I could find them I'd like to get a threaded bottom bracket with enduro's stainless steel bearings.
For the wheels I have a disc brake power tap g3 (the one that looks like a DT Swiss 240 straight pull hub) that I got on sale for $300 and a CarbonTi straight pull front hub I picked up on the cheap last Thanksgiving. The plan is to build them up with some Nextie rims drilled for internal spokes (because I'm a masochist but, also, because I hate the look of exposed spoke nipples). I also have a Canyon VCLS 27.2 seat post that I sniped for $50 on eBay some time ago. Should be a comfy adventure bike when all is said and done :)