I believe that's the brake design. They borrowed it... which is why it was by the rear brake cut-out. My 1st generation P3 had that sticker and a made in wherever sticker as well.

DIY
The factory Profile Design stem doesn't play well with the Shimano Missle EVO bars.

nice. dash saddle too.

can you give a close up of your spares setup at the back, looks neat.

---

https://www.pbandjcoaching.com
https://www.thisbigroadtrip.com

Nice Bike!!!!!!!

Really cool little product my shop carries!
SpeedSleev

Long piece of elastic with loops for two tubes, CO2, lever, and multi-tool (not part of my race kit)


Folds together and held with velcro.


Tucks up nice and snug behind the saddle and is very quick to get what you need.

I just noticed there's actually quite some place underneat your Dash (?) saddle.

hmm....if it doesn't compress too much when you sit on it I think you could fit in a spare tube or something for race day ;)

Loving all the sleek looking Plasma's!

I mentioned in this thread that my BB cup was slipping out, causing the crank to wobble. Scott told me they wanted to look at it and to ship it back to them. Bike went back to LBS, got stripped and frame / seat post / fork / stems (I had both 75 and 99) were sent back to Scott in Utah.

I didn't have much trouble getting hold of Scott, although the store where I purchased it got hold of them first. I shipped it and they gave me an emailed answer in within 48 hours of receiving it.



So, happy that a new frame is on the way. This was the third season for the old one so a new one is perfect, even if I had to go without for a week or two.

---

https://www.pbandjcoaching.com
https://www.thisbigroadtrip.com

wow
/thread

---

Coaching - Future Endurance

Speedsleev is making one of the coolest, simple and most innovative products to come along in a very long time. My SeatSleev is the best accessory I have ever owned!

Alright, I'll play...

How did you mount the BTA bottle?

Here is my bike after todays ride with the setup I plan to race next sunday:

Easiest way is 4 zip ties and a cage. I looked for a pic of my Plasma with it set up but couldn't find one. If I find one I'll post it. The other option would be use the search function there are a few threads on how to do it.

---

Brian Stover USAT LII
Accelerate3 Coaching
Insta

I've done that before. one of the zip ties broke while riding. Not very happy about that :/

4 zip ties & a trek bat cage. works like a charm.

If you get the opportunity, can you then please take a photo of how you zip tied it?

[URL=http://s1165.photobucket.com/...zps47e1c2d7.jpg.html][/url]


[URL=http://s1165.photobucket.com/...zps1452d15a.jpg.html][/url]

Hey guys, I was wondering if anyone could help me with some sizing/geometry questions.......I have a chance to get a crazy deal on the scott plasma and leave my p4, the only catch being its a 56/Large. a p5 and plasma are the only bikes I would leave my p4 for, So im trying to figure out if its right for me or stay on my current bike.......This is based off my retul fit 4 months ago.

I'm currently on a 56cm P4 with a 90mm stem. Im 6' tall 33.75-34" inseam.

Heres the two numbers that are wayyy different.

headtube length-----P4=125 Plasma=169......Between my headset and spacers I have 1 3/8 inches=34.92 mm to the bottom of the stem on p4.
standover height----P4=780 Plasma=840....This is crazy difference, 2.4 Inch .

Reach is spot on with what I need - P4= 433 Plasma=430 (I needed a bit shorter)

I would be moving over my sram red groupset, tririg omega front brake, zipp firecrerst 404s, and Shimano Pro missile (Straight bars)... Will there be any issues with those parts im unaware of?

Im going to talk with my fitter tomorrow a bit and see his ideas but figured you guys would be able to point me in the right direction to start. If it doesn't fit....o well, it was worth a shot.

Please and thank you in advance.

-Sam

---

___________________________________________________________

"A wise man once told me......God doesn't call the equipped, he equips the called."

I can't help you with comparisons to your P4, as I've never been on one of those C-word bikes, but I can tell you that I'm 6' with a 34" inseam and the Plasma fits me like a dream. I have the Plasma premium, but I did end up getting the TT stem to get lower, but that was just my preference.

You should be good on compatibility of parts/components between the bikes. Go for it and never look back!

---

Shut up legs.

This should help you establish differences between your current set up and a Plasma Premium.

COMPARISON SPREADSHEET HERE

Let me know if you have any questions.

---

https://www.pbandjcoaching.com
https://www.thisbigroadtrip.com

Can anyone let me know how much of the drop out adjustment screw they are using to centre the back wheel.

I just got a new frame under warranty, the guy building it seemed to be using a ton of screw on the right hand side and none on the left just to centre it. I did not get a good look but will tomorrow, I assume he is doing something wrong. I thought the screws were just to adjust distance from the frame not to centre the wheel.

---

https://www.pbandjcoaching.com
https://www.thisbigroadtrip.com

Also .... anyone know what this is? It was left over from my build!!!! Something to do with the fork / steering assembly I think.

---

https://www.pbandjcoaching.com
https://www.thisbigroadtrip.com

Looks like a lower crown race.

Builder said the race was built into the carbon fork .... I think. Is this a hangover from an older gen frame? Or should it have been put on this frame?

---

https://www.pbandjcoaching.com
https://www.thisbigroadtrip.com

Looks like the one on my Plasma 2. How does the steering feel?

Not ridden it yet, still got a few things to finalise. Seat post cutting for one.

---

https://www.pbandjcoaching.com
https://www.thisbigroadtrip.com