Keep it and use it as a nice paperweight. I love mine.

Sharks Teeth only come in the Flat stem yeah??

Anyone have a Plasma Seat cutting guide they can give/borrow to me??

Am in Australia.

---

-------------------
Trying since 81
-------------------

ultegra groupset and fizik tritone are coming

I am building my front end up very similar to yours. Flat stem, Brezza, Tririg--looks fast! Did you have any issues mounting the Tririg break to the fork? It looks like it needs some spacers or washers behind the bolt hole of the Tririg brake to keep it from binding on the fork.

---

Shut up legs.

Tri-rig should come with a few plastic spacers., and you'll need a few as otherwise the brake holder will rub the fork. Your LBS should have them if you don't have enough

Bigger issue is routing of front brake cable to the tri-rig if you have a size-s frame.

I have a Brezza and Tri Rig brake. The brake does come with enough spacers to push the brake away from the fork, it is close-ish but more than enough with a little room to spare.

---

https://www.pbandjcoaching.com
https://www.thisbigroadtrip.com

The f&%$g cables on my bike kill me. I have gone through a dozen different alternatives in my mind but nothing works really well. I think, if you have a low stem then the cables coming out of the extensions looks nice (as in the picture above). I have risers on my Brezza so the extensions sit quite high. I don't know whether to let them come straight back from each extensions down to the cable holes or whether to let them route above the base bar, each side of the stem, and then drop down. I think the lack of top tube cable holes is only thing moving this frame away from looking 100%

---

https://www.pbandjcoaching.com
https://www.thisbigroadtrip.com

Anyone got the Seat Cutting Tool?? or No where i can get one from??

??

---

-------------------
Trying since 81
-------------------

You don't need one. Just have your local shop cut it if you're nervous about doing it yourself.

Hi. Seriously, you don't need the tool if you can't get hold of one. The end does not need to be perfect and the tool has a cutting ago that is wide enough bit to make it perfect anyway. It really is not essential and, considering the post is held by a small bar in the frame at the rear if the seat post I am surprised they included it at all. It is probably included for DIY muppets with heavy hands. Any half decent shop would be able to use a quality blade and cut as straight by hand as they can with the tool. In fact, my last cut i didn't bother giving my LBS the tool.

---

https://www.pbandjcoaching.com
https://www.thisbigroadtrip.com

still waiting for ultegra cranks and derailleurs =)

Ramil you cut the seat yet or had a Fit?

---

-------------------
Trying since 81
-------------------

I had fitted it already. It looks too long because I'm without shoes on the photo

Have you got the Dura Ace 7800 Rear Brake??

why ultegra?? Is it the DI2 Version?

---

-------------------
Trying since 81
-------------------

Yes, there is DA 7800 rear brake. I like the design of 6800 cranks. No, it will be mechanical version. Don't throw rotten tomatoes at me but I don't like how works electronic shifting, mechanical is more friendly and more reliable as for me

Agree on Mech.

Where ya From Mate?

---

-------------------
Trying since 81
-------------------

Cheers from Ukraine, Kharkiv.

Having been a long term Specialized bike owner I thought I would give Scott a go as the Plasma Premium / 3 looked very special indeed.
Ordered the frameset 3 weeks ago and received it last week. As it was packed really well I left everything in place and then I travelled with the framset and parts to build up the bike in the UK where I am now for a few weeks till I return back to the USA. All looked beautiful until… Scott had sent the wrong fork with the frame!!!


DOH!
Scott UK are helping me as we speak so hopefully I will get the right fork.
Can't wait to ride it.

Unlucky Dude!

Was it the Foil Front Forks??

Please don't throw your seat post cutting guide out! I may need to Borrow it! :p

---

-------------------
Trying since 81
-------------------

No idea… think it was simply a different year to the frame. Frame was a 2012 model so Scott UK said, so might be 2011 forks or earlier!

Yeah the front forks are from the 2011 Model.

Collectors Item! haha!

---

-------------------
Trying since 81
-------------------

Guys at Scott UK were fantastic! I know the general manager for Scott UK so they managed to sort out a pair of the right forks for me and are sending today! Yay!!!
Should arrive Friday or Saturday so that's a load of my mind! So thank you to Steve Carter (GM) Brian Taylor, and Tom Harrison at Scott UK. Wonderful customer service!

Congratulations =)

Ha! The Plasma 3 Flat Stem Shark Teeth Mafia?