I do the same as the other have mentioned.
1. use a normal stem cap to preload to 4nm.
2. tighten the two(2) stem bolts.
3. remove the normal stem cap.
3. install the aero stem cap and tighten just enough till it cannot be shifted/moved by hand.
the only thing i have done differently now, is that i manage to get hold of two(2) M6 alum spaces to put between the hollow space below the aero stem cap and the top of the expander plug. This way, even if i tighten the aero stem cap down, there is no longer any space below for it to squish out of shape.
1. use a normal stem cap to preload to 4nm.
2. tighten the two(2) stem bolts.
3. remove the normal stem cap.
3. install the aero stem cap and tighten just enough till it cannot be shifted/moved by hand.
the only thing i have done differently now, is that i manage to get hold of two(2) M6 alum spaces to put between the hollow space below the aero stem cap and the top of the expander plug. This way, even if i tighten the aero stem cap down, there is no longer any space below for it to squish out of shape.
Last edited by:
Cloudberrie: Sep 12, 22 4:23