Morelock wrote:
Yeah can see they are a bit out of sync in the picture. My main concern with this project was that (from the Tririg literature, not having had the tilt kit in my hand I hurts my theorycraft) it looks like the kit bolts in from the top, whereas the 3T stuff all bolts in from the bottom. Is that right? Or can the Tririg be used either way? Probably wouldn't be too tough to have some risers (bottom piece in pic4, the 3T riser) drawn up in CAD. I've done some 3D printed wedges for 3T bars, probably just a few dimensional changes (although you'd probably want metal not PLA for them)
The Tririg tilt kit can bolt from the top with M6 bolts, or by inverting the "undermount setup" with M5 (which is used by 3T) from the bottom. I was hoping the slammed tilt washer was flat, but it is made to adapt to the airfoil shape of the Alpha X. I will probably machine an aluminum adapter. Will of course post updates as the project moves along.
Last edited by:
marcofoils: Mar 10, 19 10:49