The VT levers will cap right on the end. Some people don't like them, but I never had any issues. I've plugged other types in by wrapping some duct tape around the expanding section.
Chad

So, the issue is that the ID of the Vision brake insertion is greater than typical? For some reason, I thought it was the other way around, and that "stardard" levers couldn't fit inside.

---

Steve

"If you ain't first, you're last." Reese Bobby Talladega Nights

My VTs are the old one-piece, but I plugged a Tektro lever in without any issue. My ID is 19mm. What is the bar you have?
Chad

I've used SRAM and Bontrager.

I haven't purchased, yet. I want to make sure I'm going to have some options before doing so. Most reports are that the Vison levers rattle, which I'd like to avoid. If my current Bontrager levers will work, that'd be good. Although, I may go with something internal, anyway.

---

Steve

"If you ain't first, you're last." Reese Bobby Talladega Nights

I have a used bar with brake levers if you are interested in pics. PM me and we can work out a price.

I used the profile design ones and they slipped right in no problem. Went with them because they're a little beefier than the vision tech ones.

---

___________________
Twitter | Kancman | Blog

I've used the cheap diacomp 188's and Tektro RX 5.0 in alloy VT base bar

jaretj

X2 And, they have a strong spring return.

---

Mike Sparks


I have competed well, I have finished the race, I have kept the faith.