Used both on a Giant TCR.

I found the C2's to be the most comfy, in fact the most comfy of any aero bar I've ever tried. My TCR was a meduim frame and was rode with small size C2's. Worked great. They were a little longer than the Jammer GT's, but still not long eough to be stretched out. In fact I perefered the position with the small C2's than with the Profiles.

Nohing wrong with the Jammer GT's, but it's hard to beat the C2's for comfort.

I use Jammers on my OCR, found them very adjustable and fit me fine and I'm happy with them, I've fitted the Jammers below the handlebar and wrapped them in bar tape for extra comfort. Done 2 seasons with them including two halfIMs and one IM.

I can't comment on the C2s - never tried them.

Well here's a question regarding the jammers and C2, can I get a setup on top of the bar vs. below?

I rode the bike on my trainer, tried to simulate aero riding a bit just laying across the cowhorns, and it feels like I'd ride want it a little higher..

Neither....

Get the Profile T2 and extra bolts to mount the ext under your bar....

Was just looking at pic of the C2, and I can't if the bars mount under the pads ride on top..

Profile t1 the way to go huh?

sheesh, they're a much better deal than the c2!

Looks like I need a dealer in Oregon...

http://www.profile-design.com/...erobars/t2_plus.html

You can mount the ext under the base bars...you'll need longer bolts and (2) extra "8" washers....

Works awesome!

The Jammers can be mounted either above or below the base bar. I had mine mounted above the base base for one season until I decided I wanted to go lower.

I went with the Jammers mounted below the bar as well, but I switched out the extensions for some HED s-bends. I've been using this setup for a while, it feels great. Now though, the Profile T-2 setup is basically the same thing...

Here are some pics: http://forum.slowtwitch.com/...earch_string;#376202

---

---------------------------------------
I am a living animal, tied to a dying soul. -PKD

I`m using Deda alu clip-ons on my TCR.

M frame, and 9cm 3T alu stem

Pretty happy with the setup, but thinking about putting on Vision Tech integrated next year

Pic here: http://syklingensverden.com/...amp;catname=Dagbøker

---

Espen Wagener
Kongsberg, Norway

http://www.espenwagener.blogspot.com

Was that your rig in the top right hand corner...? It's the only tcr (must be a composite?)...

Yes it was

---

Espen Wagener
Kongsberg, Norway

http://www.espenwagener.blogspot.com