Login required to started new threads

Login required to post replies

2009 Cervelo P2 P2C SOLD
Quote | Reply
I am selling my 2009 Cervelo P2C. It was raced all of 2009, 2 TT's in 2010 before an injury ended my season and 1 TT this year. I would estimate 2500 total miles on the bike. I have to go to a slacker geometry, as you can see from the photo below even in the 75 degree position my saddle is all the way back causing reach problems. This has been a great bike and has gotten me on the podium in all but 2 TT's and I suck so it must be the bike.

The photos below are of the bike in full battle dress after the state TT today, but I am going to be taking pretty much everything off the bike and replacing it with new components off of a Cannondale Slice 5 so here is what you get.

Frame: 2009 Cervelo P2C 58cm
Seatpost: Cervelo
Fork: 3T
Crank: NEW Shimano Ultegra SL 53X39 175
BB: Used, 400 miles, F1 Ceramic
Headset: FSA
Pedals: Not Included
Chain: NEW Shimano 105
Front Derailleur: NEW Shimano 105
Rear Derailleur: NEW Shimano 105
Brakes: NEW Tektro R520
Brake Levers: ProMax
Shifters: NEW Microshift
Wheels: NEW Shimano R500A
Stem: I have a ton of these. Tell me what size you think you will need and I probably have it.
Tires: NEW Schwalbe Lugano 700 X 23
Saddle: NEW Fi'zi:k Arione TRI2 Mg rails
Bars: Cannondale C3, 31.8 + Profile TT Alloy clip ons

The bike has never been crashed, but there are some blemishes so I want to show those.




The blemish below came from shipping my bike across the country in February. The plastic cover came off of the wheel and scrached the frame above the front derailleur which you can see in this picture.



The scratch at the bottome of the head tube also occured during shpping, but I am not sure how.



The next two pictures are of scratches on the seat stays from the first week I had the bike. I put it on the trainer with the wrong skewer and when I started to climb on it slipped out.





There is the normal scuffing inside the wheel cut-out and probably some other normal road wear that I did not see, but the frame is in good shape and the components are new. I hope to get everything moved by Memorial day so I will post pictures of the bike with the other components when I get finished.

$1,450(SOLD) + actual shipping. I accept Paypal or if you have superpowers like heat vision or flight that you would like to trade, I would consider those.

My insomnia destroying blog can be found here http://tfalin.blogspot.com/

Last edited by: king-tony: Jul 12, 11 19:22
Quote Reply
Re: 2009 Cevelo P2 P2C [king-tony] [ In reply to ]
Quote | Reply
I did not quite get the build finished, but here is what I have so far. Also, I found a set of T2+ Cobra carbon bars in the parts bin that I will throw in as well. These are used and I will include them as well as the aluminum bars mentioned above.



My insomnia destroying blog can be found here http://tfalin.blogspot.com/

Quote Reply
Re: 2009 Cevelo P2 P2C [king-tony] [ In reply to ]
Quote | Reply
May consider this, let me know when it is b
Can you guestimate shipping to postal code K1N5m4 ottawa camada?
Quote Reply
Re: 2009 Cevelo P2 P2C [Supermartin73] [ In reply to ]
Quote | Reply
Sorry for not having this built yet. I herniated a disc and sitting or standing is not fun right now. I will try to get this together as quickly as I can. I will get you an estimate on shipping.

My insomnia destroying blog can be found here http://tfalin.blogspot.com/

Quote Reply
Re: 2009 Cevelo P2 P2C [king-tony] [ In reply to ]
Quote | Reply
I will install new cables and bar tape before shipping, but this is the complete bike - All PM's have been replied to. Let me know if you have any questions.













My insomnia destroying blog can be found here http://tfalin.blogspot.com/

Quote Reply
Re: 2009 Cevelo P2 P2C [king-tony] [ In reply to ]
Quote | Reply
Cervelo is spelled wrong in your title. Might want to fix that for anyone doing a search.
Quote Reply