http://oi44.tinypic.com/35icg3n.jpg
this is my vision of the ultimate sub 10 degree yaw triathlon (50kph) bike built much by the knowledge of slowtwitch forums. Its been a fun project and I'm up for critique and hopefully a couple compliments too!
Ok so I'll explain it front to back.
single dura ace bar end shifter
vision aero brakes on bar ends
s bends with bull horns removed
aero nose cone tapering from a rounded 1 inch front to 1 .5 inch peak width at head tube and tapering into a smooth airfoil. Totaling a 23 cm deep headtube
tri rig aero brake concealed in nose cone
650 jetstream fork pulling air off the 650 hed 3 deep clinch, vitt open corsa 20 latex tube, tire rim smothed with silicone front n back
aero nutrition container behind stem
front wheel drafts off the 650 tube container
soon to come speed aero skewers
bottom bracket box for co2 levers and valve inflator
fsa neo pro 170mm crank no front mech speedplay pedals
adamo saddle
tailbox for 700 tube, bottom bracket box and esp tail box create tom as splitter effect with bulge disk and 23mm conti gp 4000
hidden is sleek simkins egg brake tucked behind bb.
ten speed dura ace.
carefully followed all usat rules.
23 cm of aero bar drop but 5 due to rotating on front 650 not changing angles. plus adamo and 170 cranks, hip is nice and proper.
soon to come aero derail pulleys.
hope you like
this is my vision of the ultimate sub 10 degree yaw triathlon (50kph) bike built much by the knowledge of slowtwitch forums. Its been a fun project and I'm up for critique and hopefully a couple compliments too!
Ok so I'll explain it front to back.
single dura ace bar end shifter
vision aero brakes on bar ends
s bends with bull horns removed
aero nose cone tapering from a rounded 1 inch front to 1 .5 inch peak width at head tube and tapering into a smooth airfoil. Totaling a 23 cm deep headtube
tri rig aero brake concealed in nose cone
650 jetstream fork pulling air off the 650 hed 3 deep clinch, vitt open corsa 20 latex tube, tire rim smothed with silicone front n back
aero nutrition container behind stem
front wheel drafts off the 650 tube container
soon to come speed aero skewers
bottom bracket box for co2 levers and valve inflator
fsa neo pro 170mm crank no front mech speedplay pedals
adamo saddle
tailbox for 700 tube, bottom bracket box and esp tail box create tom as splitter effect with bulge disk and 23mm conti gp 4000
hidden is sleek simkins egg brake tucked behind bb.
ten speed dura ace.
carefully followed all usat rules.
23 cm of aero bar drop but 5 due to rotating on front 650 not changing angles. plus adamo and 170 cranks, hip is nice and proper.
soon to come aero derail pulleys.
hope you like