I'm building up a new Parlee TTiR. I'll be using my existing Di2 components which include the DA TT shifters on the aero bars (one button on each side), DA brake levers wit the shifters, Ultegra 6770 FD and RD. The bars are PD Volna.
So in looking at the setup I'm wondering what if anything can be done to keep the front end as clutter free as possible as it's built. The wires from the TT shifters come out under the extensions, and the wires off the brake levers come out under the base bar. All this needs to come together at the junction box (5 port) which will strap under the stem. It seems to me that there's not really a way to tighten it up. There's going to be wires hanging down.
Any insight for a solution?
So in looking at the setup I'm wondering what if anything can be done to keep the front end as clutter free as possible as it's built. The wires from the TT shifters come out under the extensions, and the wires off the brake levers come out under the base bar. All this needs to come together at the junction box (5 port) which will strap under the stem. It seems to me that there's not really a way to tighten it up. There's going to be wires hanging down.
Any insight for a solution?