I have used the performance bike Forte brand Pro TT clip ons, they are very similar stack as the extensions are mounted under the basebar as well. http://www.performancebike.com/..._10551_1167488_-1___

---

Powered by Dalzell Coaching

You can get the pad on a Vision Clip on right down to your basebar.

jaretj

Is that all of them? I'm having a bit of trouble working out the differences between the different models:
http://www.visiontechusa.com/category_list/43/Clip-on-Bars

I have the trimax team clipon

Thanks for the tip!

Paired with this, is there a generally accepted 'best' base bar?

I'm struggling to find anything narrower than 40cm that isn't a round almost the whole way

I doubt there are many clip-ons as low as the Hed clip lite:

---

Advanced Aero TopTube Storage for Road, Gravel, & Tri...ZeroSlip & Direct-mount, made in the USA.
DarkSpeedWorks.com.....Reviews.....Insta.....Facebook
--

With a bit of modification you can reverse mount a Profile Design T-series clip on so it's under the bar.

Rather than pissing about with weird mods though, I would probably just flip or use a negative degree stem.

---

-------------------------------
´Get the most aero and light bike you can get. With the aero advantage you can be saving minutes and with the weight advantage you can be saving seconds. In a race against the clock both matter.´

BMANX

That is not a stock set up that is for sure. I have two pairs of these aerobars and to get that set up you have to modify the armrest mounts and then have custom armrests as well. That being said, that set up is as low as you can go.

Standard set up has about 15mm of rise, then the armrest at about 2-3mm then the pads at another 15mm give or take a bit.

http://jtekengineering.com/axeaerobar.php

Seem like they would be low stack, but I'm a mostly clueless noob

(Anybody have thoughts on the quality? They intrigue me)