Here are a few things I am needing to unload.
First is my caad10 frameset. size 56. It is a great bike, just a little on the small side for me. The previous seller put new bearings in the headset and BB(I have less than 1000mi on it since my purchase). There are a few scrapes and scratches, but beautiful overall. Only weird thing is that it didn't like my brazen on sram derailleurs. Not sure if I had a couple bad ones or what, but it was hard to get the angle right. Braze on mount looks good besides paint off there. I used a washer, but sram makes a special washer.
there are a few little imperfections, but a beautiful bike overall. There is a small spot near the bb, where it looks like grease stained the white paint, but you can't really see well with a crankset installed. There is one like that under the top tube as well. Both are in places where it is harder to notice. A friend actually asked if the bike was new the other day.
$485 shipped conusa
[URL=http://s9.photobucket.com/...zps70081b65.jpg.html][/url]
[URL=http://s9.photobucket.com/...zpsc1ea6697.jpg.html][/url]
[URL=http://s9.photobucket.com/...zps206ce7d2.jpg.html][/url]
[URL=http://s9.photobucket.com/...zpsf877d594.jpg.html][/url]
[URL=http://s9.photobucket.com/...zpsc8c9e632.jpg.html][/url]
[URL=http://s9.photobucket.com/...zps92a3b978.jpg.html][/url]
[URL=http://s9.photobucket.com/...zpsd510277b.jpg.html][/url]
Next is a set of DATI hubs. As far as I can tell, they have never been laced up. Was wanting to do something with them, but at 190ish, I probably need more spokes. About 67g front and right at 200g rear.
[URL=http://s9.photobucket.com/...zps6lhn41cb.jpg.html][/url]
All sold except caad frameset and wcs stem
First is my caad10 frameset. size 56. It is a great bike, just a little on the small side for me. The previous seller put new bearings in the headset and BB(I have less than 1000mi on it since my purchase). There are a few scrapes and scratches, but beautiful overall. Only weird thing is that it didn't like my brazen on sram derailleurs. Not sure if I had a couple bad ones or what, but it was hard to get the angle right. Braze on mount looks good besides paint off there. I used a washer, but sram makes a special washer.
there are a few little imperfections, but a beautiful bike overall. There is a small spot near the bb, where it looks like grease stained the white paint, but you can't really see well with a crankset installed. There is one like that under the top tube as well. Both are in places where it is harder to notice. A friend actually asked if the bike was new the other day.
$485 shipped conusa
[URL=http://s9.photobucket.com/...zps70081b65.jpg.html][/url]
[URL=http://s9.photobucket.com/...zpsc1ea6697.jpg.html][/url]
[URL=http://s9.photobucket.com/...zps206ce7d2.jpg.html][/url]
[URL=http://s9.photobucket.com/...zpsf877d594.jpg.html][/url]
[URL=http://s9.photobucket.com/...zpsc8c9e632.jpg.html][/url]
[URL=http://s9.photobucket.com/...zps92a3b978.jpg.html][/url]
[URL=http://s9.photobucket.com/...zpsd510277b.jpg.html][/url]
Next is a set of DATI hubs. As far as I can tell, they have never been laced up. Was wanting to do something with them, but at 190ish, I probably need more spokes. About 67g front and right at 200g rear.
[URL=http://s9.photobucket.com/...zps6lhn41cb.jpg.html][/url]
All sold except caad frameset and wcs stem