SRM Pro - includes crankset (175 mm, 53/39 rings; Shimano Octalink); PC5 and Ultegra BB - $1200
**Does NOT include sensor cable, computer mount, USB download cable, software or charger. Needed accessories are available from SRM (see www.srm.de) - did a quick check, and these will run ~$350.
Stems - both are used and in good condition (8/10):
Vision Sizemore - 110 mm x 26.0 mm; fits 1 1/8" steerer; 80 degree rise - $25
3T Forgie - 90 mm x 26.0 mm; fits 1 1/8" steerer - $15
**If needed, I have one shim available to convert to a 1" steerer - no charge.
Seatpost - Easton EC70 - 31.8 mm x 360 mm, uncut. Used and shows abrasion from insertion, but structurally sound. Came w/ a used frame that I bought, rode it for a while, and swapped it out for a zero offset post. - $35
Vision alloy ski-bend clip-on aerobars - 270 mm length, for 26.0 mm bars. Used, but in good condition (7/10) - $50
**Note - I recently discovered a small ding of unknown origin on the underside of the right extension - approx. 3 mm diameter, but purely cosmetic. Bike has never been crashed - likely occurred in transit. Does NOT include bar end shifters or computer mounting bracket pictured - might be able to salvage the tape though.
Questions, comments, or want more pix or references? Post here or PM.
Happy Holidays!
Mike
_________________________________________________
"The will to win means nothing without the will to prepare" - Juma Ikangaa
http://www.litespeed.com
**Does NOT include sensor cable, computer mount, USB download cable, software or charger. Needed accessories are available from SRM (see www.srm.de) - did a quick check, and these will run ~$350.
Stems - both are used and in good condition (8/10):
Vision Sizemore - 110 mm x 26.0 mm; fits 1 1/8" steerer; 80 degree rise - $25
3T Forgie - 90 mm x 26.0 mm; fits 1 1/8" steerer - $15
**If needed, I have one shim available to convert to a 1" steerer - no charge.
Seatpost - Easton EC70 - 31.8 mm x 360 mm, uncut. Used and shows abrasion from insertion, but structurally sound. Came w/ a used frame that I bought, rode it for a while, and swapped it out for a zero offset post. - $35
Vision alloy ski-bend clip-on aerobars - 270 mm length, for 26.0 mm bars. Used, but in good condition (7/10) - $50
**Note - I recently discovered a small ding of unknown origin on the underside of the right extension - approx. 3 mm diameter, but purely cosmetic. Bike has never been crashed - likely occurred in transit. Does NOT include bar end shifters or computer mounting bracket pictured - might be able to salvage the tape though.
Questions, comments, or want more pix or references? Post here or PM.
Happy Holidays!
Mike
_________________________________________________
"The will to win means nothing without the will to prepare" - Juma Ikangaa
http://www.litespeed.com