TriRig Omega X pad-holder screw specs

Triathlon Forum
1

I am switching my wheels between alu and carbon on my tri bike for training / racing and change the pads accordingly.

Now I need spare parts. Don’t feel like buying new pad holders for $30 (per wheel).

  1. The bolts that hold the pad holders In the brake (3mm hex - really? and seems like soft metal) is stripped. Anybody know the spec of those bolts?

  2. I lost one of the small screws that fix the pad in the pad holder (2mm hex). Need that spec too.

If you have a good source to get them, that is also much appreciated.

Thx.
Mick

2

I would send an email to TriRig.

3

Specs are here.

https://www.tririg.com/store.php?c=omega&page=installation

4

Specs are here.

https://www.tririg.com/store.php?c=omega&page=installation

Awesome. Hadn’t seen that before. That’ll help.

5

I lost one of those screws and TriRig sent new ones, no charge.

6

You can always email us - support@tririg.com - but as others have mentioned, we do list all the specs. ALSO, you mention having lost the M4 x 6mm set screw from your brake lever, which adjusts pad stance width. We include two extras of that screw with every brake sold, so if you still have your original packaging, you already have those.

Thanks!

7

Dear TriRig,
Awesome that your are responding here.
I did meanwhile sent an email out to you guys asking for spare.

On the M4x6mm, maybe I wasn’t clear in my description. The one I lost is the only M3x8mm that fixes the brake pad in the brake pad holder. The pad stance adjustment screw I have and I have the spares too.

Thank you.
Mick.

You can always email us - support@tririg.com - but as others have mentioned, we do list all the specs. ALSO, you mention having lost the M4 x 6mm set screw from your brake lever, which adjusts pad stance width. We include two extras of that screw with every brake sold, so if you still have your original packaging, you already have those.

Thanks!