Thanks slowtwitch! pics

Started doing tri’s about 4 years ago, and I had no clue what I was doing. I found this website, and honestly would be lost without it. Full of great information, if you can handle the beatdown’s dished out here :).

This bike was made possible by Slowtwitch. I spent countless hours searching threads for advice on gear, equipment, wheels, F.I.S.T fitting etc… If someone told me 3 years ago I needed to get FISTED I would have punched them in the face :slight_smile:

My fit was done by JT Lyons over at Moment Cyclesport, and it was nothing but a great experience. Props to the guys at specialized and HED as well.

Let me know what you think. See you guys at IMCDA!!!

http://i43.tinypic.com/29gmzog.jpg
http://i42.tinypic.com/2i8uhwz.jpg

I spent countless hours
…and it sounds like countless dollars too!

Beautiful machine. Hopefully it isn’t all aesthetics and it has the engine to boot. :wink: Good luck at IMCDA!

All those hours on ST and you don’t have a Cervelo, white saddle and bar tape, and your seat is too high?!?!

Wasted time!

(actually, that’s a sweet looking bike. Good luck at CdA)

what is that, an 85deg sta? :slight_smile:

It’s got no motor :), and yeah I sit pretty steep, but not 85 :wink:
.

I love JT’s fits. When someone posts pics, you know the bike is going to look appropriate. Appropriate STA, appropriate drop, appropriate number of spacers, appropriate stems, etc.

You can judge how a bike fits without seeing the rider on the picture?

Your seat’s too high! ;D

Great attitude and great bike. Your sexy.

There are only 3 FIST certified instructors, Slowman, Jordan, and JT.

JT has an engineering degree and fits using a fit bike and power data.

I need to get off my ass and have him do my fit for me…

Looks fast. Have a great race!

There are only 3 FIST certified instructors, Slowman, Jordan, and JT.

I “think” you could add JC to the list:)

Steve
Very nice bike. You should be easy to spot around town on that:)

Good luck at IMCDA.

Cranks should be parallel to the ground, front skewer shouldn’t point forward, and you need to put new weatherseal on the driveway.

…rookie.

for gawd’s sake man, take the caps off the presta valves!!!

nice bike. good luck at CdA

I run my mouth…er… fingers on here from time to time, so I am going to go ahead and say you owe me.

If you come up on a black & white Orbea Ora with HED C2’s while riding that machine, don’t pass me. I’ll consider us even after that!!

Rappstar is right… JT knows what he is doing. Support Moment in SD

I can hear the screaming now as the button on the garage door opener is pushed!!!

Quite the Gallant Steed you’ve got there! I just bought the same wheel set. Don’t you love them?