What options exist to mount my CatEye wired computer to my aerobars (profile) on the stem. I use the Profile Aero Drink cup. I am looking for a mount that would go on the stem which would put the computer on top of the middle of the stem, not the side. I also tried moving the mount to the outside of the aerobars but then I cannot see it.
Peace out.
I just got a micro wireless, at first ididnt like it because you actually had to zipp tie the thing to your handlebar or UCM piece. THen I noticed that there are zip tie holes going the other way also. I just zip tied it to the stem. Im not sure if they make a specific mount for stems though, I have seen lots of peopl ejus tmount it sideways on the stem.
I asked the same question yesterday in this thread:
http://forum.slowtwitch.com/gforum.cgi?post=1309668;sb=post_latest_reply;so=ASC;forum_view=forum_view_collapsed;;page=unread#unread
I’m going to look and see how feasible cutting down my cateye astrale 8 mount and using zip ties is going to be.
Velcro! Don’t waste your $20 on a mount that is a pain to use, can only be mounted in limited locations, and sticks up so it’s not aero. Throw some velcro on your stem and the bottom of your computer and you have a cheap aero solution.