WTB: FSA Mega Exo Crank Bolt tool

Classifieds
1

I got a FSA carbon slk crank and realized I need this special tool, so if anyone has got one pm me
.

2

Are you talking about the “M27 QR Nut” that is on the non-drive crank arm?

Looks like this: http://i36.tinypic.com/10y2ukl.jpg

3

For this crankset http://i40.tinypic.com/2vxrms8.jpg
.

4

are you talking about the tool for the crank or for the bottom bracket?

5

Crank tool, not worried about the bb. It’s a 68 English and I got that tool

6

Crank tool, not worried about the bb. It’s a 68 English and I got that tool

I had one of these quite some time ago, you shouldnt need any special tool. should go on with a 8mm allen i think.

7

Leave the M27 QR Nut intact because it is a self-extracting cap that allows the M18 bolt that screws to the drive side crank arm to release itself. Just use a 8mm hex key and you are in business. You can go to an ACE Hardware store and buy a 8mm hex for $5-10 bucks. Try to get one that has a long handle because you’ll need the torque to free the M18 bolt.
http://shop.advanceautoparts.com/wcsstore/CVWEB/staticproductimage//N3417A/large/17632230_otc_otc7328_pri_larg.jpg

8

Cheers for the advice I’ll do that instead
.