Seat tube angle survey results

arcsin(horizontal distance from BB center to **center of where you sit on the saddle **/ saddle height measured to the same point). The hard part is figuring out where you sit independently. You really need someone to look at you while you ride. However, having done the FIST workshop,
you have got to be kidding.

have you have actually ever fit people on their bikes? because if you have, how can you say this?

ok, let’s try this:
say i am being fit independently by a highly qualified FIST fitter no less. so the fitter is watching me pedal on my bike on my trainer. so can you please explain exactly and clearly how the fitter is going to come up to me with his ruler, tape measure, calipers protractor, whatever, look at my ass and quads in my bike shorts sitting there on my saddle and quantify exactly the location of this “center of where i sit on the saddle.”

your answer will be very interesting. if you can come up with highly accurate and reproducible (and explainable) method, then i think ‘we got a winner’.

(but, as always, it will be a lot easier for you if you just ignore my question, call my post ‘contrarian’, and leave it at that …)

"The hard part is figuring out where you sit independently. "

During any ride you will be sitting at different parts of the saddle at different times.

There is a tendancy to point at TT riders sitting on the tips of the saddle nose under hard effort as “proof” that they are really riding steep. Reality is that every rider pulls forward and moves forward under hard effort whether in a tri position or on a road position while hammering on the drops. Even if you moved the saddle further forward the rider would still pull to the front of the saddle under certain riding conditions. If you standardized the center of your seat as the base point, I doubt that the angles would usually be as steep as you claim.

Cerveloguy, you may be onto something here, as I have gone through a similar experience just this past weekend.

I decided to use my road bike for a local sprint this past Sunday, instead of my 79 degree 650 wheel tri-bike. I don’t know why I suddenly did this, but I guess I just didn’t want to look all geeked out for a 20Km sprint race. So I slapped a pair of spare aero bars onto my road bike and was on my way.

Simply put, I was shocked at how comfortable I was. Of course, I was probably not as aero as I would have been on my tri-bike, my saddle-to-handlebar drop is not nearly as agressive as on my tri-bike. But whatever loss in aerodynamics I think I made up in comfort and power output. Of course there’s no scientific evidence, just gut feeling. But it was enough of an eye-opening experience that I am now considering playing around with different saddle/handlebar positions on my road bike, especially in anticipation of hilly technical courses.

Contrary to what some people have posted, I have a feeling there may very well be a “happy medium” seat tube angle, perhaps in the 75-77 degree range, but I think the entire bike needs to be designed around the idea of riding in the aero position at this particular seat tube angle, to realize the optimum comfort and handling.

Of course every body is different, so there is probably no such thing as a universally perfect geometry. But it’s fun thinking about these kinds of things. At a very minumum, it helps you get through yet another looong boring meeting at work.

Ken

Point I’m trying to make is that FIST isn’t automatically the most comfortable or fastest way to ride for everybody. For some it is, but not for everybody, and it’s not just a physical fitness issue. My issue with the position was neck/crotch discomfort more than anything else. If you’re not comfortable you won’t be your best on the bike. Took me five years to figure that out. Now I’m not willing to put up with any neck/crotch discomfort any longer.

here is ‘frank day’ analogy:
do powercranks work? probably. do powercranks improve your ability to ride or run faster? probably a little.
but can they make you improve as much as the wild claims frank day likes to make on this forum? probably not.
does frank day lose his credibility by making such wild claims? yes.

Hey, I don’t just make those wild claims on this forum, I make them at our web page (and if someone calls me and asks “what can I really expect” - although I told a pro on the Navigators team yesterday he would more likely see only about 25% increase in power) and I give a 90 day money back guarantee if the customer is dissatisfied in any way.

While “credibility” is clearly in the eyes of the beholder wouldn’t it me more logical that my real credibility won’t suffer until my “wild claims” are actually proven to be false? If in fact, at some time in the future, if my “wild claims” are actually shown to be true then, I submit, my street cred will be enhanced (although I doubt the credibility of the nay-sayers will change much).

While you may think my claims unlikely to be true (based upon what evidence I know not) many who have experienced the cranks (and the benefits we claim, if not more) have no qualms about my claims. Two days ago a pro triathlete posted a short blog on our web page indicating he just set a PR in his 10k (in a triathlon no-less, not a stand alone 10k) after only 3 months on the PC’s and very little running in training (about 20 mpw, if I remember correctly).

frank, no offense meant.

the bottom line: i think if you let some good, unbiased evidence speak for itself, your product would sell a lot better.

that said, if you took a top pro cyclist and increased his power “only 25%”, he would win (by a good margin) every single race he would enter, bar none.

but has this happened?

no (at least not to my knowledge).

. The industry is finally getting it. They release a bike at 73/74, people flip around a post and jam the saddle forward on the rails. At 76, they just jam the saddle forward. So finally, we get bikes at 78, where we can actually have the saddle set up with some rail showing at that the back.

well thats the question
i rode 75 80 90 degrees in the late 80th so nothing new
and i performed the best at 72 degrees
(well had a record on cycling part back then)
soo
the best is where you performe the best not what you like the most

Funny, you have concluded that 180mm cranks are best for you, yet you don’t think the same precision (177.5mm vs. 180mm) can be applied to bike fitting in general?

about the cranks, please note the word i used before the crank example: hypothetically. i.e., it was a hypothetical example. and the case of bike cranks is good one for other reasons. the fact that manufacturers make cranks every 2.5 mm but over an extremely small range is hilariously goofy (but saves bike makers and sellers money). making them over such a small range shows how little thought is actually behind their manufacturing choices. what they should do is make cranks every, say, 5 mm but over a much larger range.

Except that I’ve seen what a MASSIVE difference 5mm makes, especially in terms of fit. 2.5mm is an appropriate increment, at least based on my experience.

so if you were the rider in the hypothetical crank example, would you pick the 150mm or 160mm cranks over the 179mm cranks?

No, but I also disagree that this is analogous to the STA discussion. Studies have shown that you can adapt to just about any crank length. There have not been studies showing similar adaptation to bike position. I.e., you can ride slack for years and years and years, and yet see immediate results from steepening your STA. This is not the case with crank length.

anyway, you misread what i wrote: I actually DO BELIEVE that precision can be applied to bike fitting in general. it is just that I DO NOT BELIEVE the current two (conflicting) STA measurement methodologies presented on the ST pages are currently anywhere near precise, in spite of their claims (claims which are not supported by any visible evidence).

I think there is truckloads of anecdotal evidence. Look at the riders that are, currently, dominating the elite level time trials OR elite level triathlon. Take that for what it is worth, but it is rather overwhelming. Do you think the entire world is so influenced by Dan Empfield’s personal beliefs?

-If you want to ride aerobars at 79deg, will you be comfortable at 76deg.?
-If you want to ride aerobars at 79deg, will you be comfortable at 77deg.?
-If you want to ride aerobars at 79deg, will you be comfortable at 78deg.?
-If you want to ride aerobars at 79deg, will you be comfortable at 78.5deg.?
-If you want to ride aerobars at 79deg, will you be comfortable at 78.2deg.?

It would depend on the saddle. If you are telling me that I could not move forward of the 76* line, then no, I would not be comfortable. It’s funny that you should ask this particular question, because I’ve actually tested it. I notice that a shift of as little as 7mm in saddle setback, which equates to roughly 1/2 a degree at my seat tube height, makes a massive difference in terms of my overall comfort, power, etc. I would say during the course of a ride, I probably shift fore-aft a net of 1cm or so. I also ride with a lot of other triathletes and find it remarkable how little they actually shift in the saddle during standard riding (i.e., on the flats, they sit in basically one spot, on steep climbs or descents, they may shift back/forward, but then move right back to the given spot for the vast majority of the ride)

jordan, it so easy to see on ST when someone is running out of ideas. the poster will make claims about what they think the other person knows or does not know. or about them being contrarian. or maybe make claims about their height. or just otherwise attack the messenger. the fact is, you have no idea what i have a grasp on, or do not have a grasp on, or who i have fit on their bikes. but we are not discussing your or my fitting resume. i am simply trying to get folks to think critically and to point out some major and glaring inconsistencies.

You are correct. However, whether or not you actually are employed as a fitter, I will dispute that your claims bely that you in fact do not grasp the fundamentals of tribike fitting. When 90+% of the top triathletes and time trialists (who are, by the way, limited by a stupid UCI rule) choose to ride in remarkably similar positions, and yet you say there is no evidence to support this methodology, I have to believe that you fundamentally don’t understand. Just because you may do something, it doesn’t mean you do it right. So yes, you may in fact be a fitter. But based on what you have written, I would not pay you to fit me.

i do not enjoy being contrarian. but i do enjoy using my head and my biomechanics knowledge to point out that there are some big problems in the methodology of the fittng philosophies presented here (even though i generally agree with the fitting philosophy). not acknowledging the existence of these problems and variability destroys the credibility of the idea.

On a fundamental level, I disagree with what I believe you are calling the basics of FIST fitting, which is to say that people select a STA within a very narrow band, and that pushing people outside of that narrow band results in tremendous discomfort. Perhaps if you could include a reply without all the quote/unquote that states simply what you disagree with (I am not sure what two STA measurements you are referring to, for example), that would help. I also think that there is a strong difference between “using your head” and being contrarian. You do not feel that you are contrarian. However, my reading of your replies is that you are basically nitpicking over what I perceive to be minor details, in an attempt to basically undermine a philosophy of fitting that you then claim to basically agree with. In my book, that is the definition of contrarian. Of course, I don’t expect you to write “you are right, I just like being difficult.” But that doesn’t mean that I cannot (or should not) infer that from what you write or how you write it.

the bottom line: i think if you let some good, unbiased evidence speak for itself, your product would sell a lot better.

Until that good unbaised evidence exists I will have to continue stating what I believe to be the truth based upon the evidence I do have.

that said, if you took a top pro cyclist and increased his power “only 25%”, he would win (by a good margin) every single race he would enter, bar none.

but has this happened?

no (at least not to my knowledge).

Perhaps that might happen if we took one single rider, one at the top of the game, and had him train on them to achieve such results and no other rider did. However, when there are lots of riders training on them (which happens to be the case) such an advantage cannot exist. However, those who are known to train on them seem to do pretty well in the big scheme of things. Current Olympic and World champion, 2 of the 3 on the TDF podium, Paris-Roubais winners, Many National champions, etc. etc.

arcsin(horizontal distance from BB center to **center of where you sit on the saddle **/ saddle height measured to the same point). The hard part is figuring out where you sit independently. You really need someone to look at you while you ride. However, having done the FIST workshop,
you have got to be kidding.

have you have actually ever fit people on their bikes? because if you have, how can you say this?

ok, let’s try this:
say i am being fit independently by a highly qualified FIST fitter no less. so the fitter is watching me pedal on my bike on my trainer. so can you please explain exactly and clearly how the fitter is going to come up to me with his ruler, tape measure, calipers protractor, whatever, look at my ass and quads in my bike shorts sitting there on my saddle and quantify exactly the location of this “center of where i sit on the saddle.”

your answer will be very interesting. if you can come up with highly accurate and reproducible (and explainable) method, then i think ‘we got a winner’.

(but, as always, it will be a lot easier for you if you just ignore my question, call my post ‘contrarian’, and leave it at that …)
I would measure STA from BB to the head of the greater trochanter, which is a point you need to be able to find anyway in order to fit someone. In my experience, while you sit on a bike, this point lies roughly above the center of your taint, which is pretty much where you sit while riding in the aerobars. This is probably not surprising, since your hips are basically centered (looking sideways at a person) within your body. I actually much prefer this to Dan’s method of measuring to the center of the saddle rails, but this also requires that you measure STA while the person is sitting on the bike (or it requires a photograph or Dartfish software, which is actually what I think you really should use for measuring this anyway). You can also verify pretty easily with a $30 laser-level from home depot (I have a Ryobi that is nice as it mounts on a tripod) hat this tends to be where people sit. Just shoot a vertical line through the greater trochanter while they pedal. Then have them get off the bike (assuming, of course, that we have a stationary or fit bike here). And the laser will pass through the point where they are sitting.

. The industry is finally getting it. They release a bike at 73/74, people flip around a post and jam the saddle forward on the rails. At 76, they just jam the saddle forward. So finally, we get bikes at 78, where we can actually have the saddle set up with some rail showing at that the back.

well thats the question
i rode 75 80 90 degrees in the late 80th so nothing new
and i performed the best at 72 degrees
(well had a record on cycling part back then)
soo
the best is where you performe the best not what you like the most
What was the event? Were you riding aerobars? Are you saying that you were very uncomfortable at 72deg, yet you performed well? Of course, there are exceptions to every rule (Lance Armstrong, for example). Which is why I said 8 out of 10 people tend to prefer riding steep. That still leaves 20%, which is a lot, who do not. And that is strictly for TT position with aerobars.

the best is where you performe the best not what you like the most

What was the event?
worlds double triathlon

Were you riding aerobars?

yes
Are you saying that you were very uncomfortable at 72deg
no i felt on my best on 72

, yet you performed well?
the other seat angle had better aerodynamics ,but in long run (read time)
i was slower due to less power

Of course, there are exceptions to every rule (Lance Armstrong, for example). Which is why I said 8 out of 10 people tend to prefer riding steep. That still leaves 20%, which is a lot, who do not. And that is strictly for TT position with aerobars.

yes thats true as what i said ,its what you selve feels the best

but like i did rode about 750 km a week i was better in 72 deg

I would measure STA from BB to the head of the greater trochanter,

BAM!, finally, now ***that ***is something i fully agree with.

the GT head is at least a decently reproducible point that does a passible job of representing the center of motion of the femur head.

but this is not the method you or empfield have mentioned in the STA survey in the sidebar.

but if this is how people fitted riders, or did accurate STA surveys, then i would most certainly agree that the fits and the data generated would be worthy of some consideration.

thanks for the considered replies.

I was under the impression that your original post was questioning why there aren’t more bikes made with seat post angles steeper than 78 degrees, say 80+. If that’s what you meant, wouldn’t these bikes would have a limited purpose and limited market.

No bike can do multiple things well. I’ve played with enough bikes, including two Cervelos to know this. The comment made below:

And I’d submit that they’re a compromise in both positions. Most likely with not only a very long top tube in the slack position, but a very short front center in the steep.

Is absolutely true in my experience. Riding a Cervelo really steep is a very dicey proposition because of so much weight on the front wheel. I did it this morning on a borrowed bike, and went pretty fast, but it was not nearly the same feeling of solid, neutral handling as I get from my Yaqui in the same position. Now I may be able to go faster given the more aerodynamic (in theory) frame/fork, and that may influence my decision to buy a full-on aero bike, but it would not be my preference.
Others who don’t need to ride that steep or have different needs in the top tube probably won’t have the same handling issues.

Riding aggressive just for the sake of doing so makes no sense to my body. There is no getting away from the fact that in a steeper position you put a lot more pressure on your taint area and more strain on your neck by holding it more in extension.

I don’t know about why others ride steep and low (aggressive), but I do it to go fast. If I want to be comfortable, I ride my road bike (which incidentally, has a 76 degree seat tube), but if I want to go fast than I get as much of my body out of the wind as possible. This is very uncomfortable. With my long arms it requires about 20-24 cm of drop, which is not so easy to achieve. I can hold that for 40K without problems and time will tell if it is good for half-IM.

I’ve been riding around 16cm of drop for a while and only in the past six months did I go the further 6cm to where I am now. It has created an interesting problem; I don’t have the slightest desire to ride my tri bike for longer rides (anything over two hours). I think that as you go steeper and lower in front, you have to split your time in a more endurable position. If you ride without much drop then you can probably ride your tri bike for everything.

Chad