5’9ish on a 54cm Seduza
31 inseam.
Too big or most likely pretty close with the right fit?
5’9ish on a 54cm Seduza
31 inseam.
Too big or most likely pretty close with the right fit?
I think you’ll be fine. I’m 5’9 and rode a medium (54) Lucero - which is the same frame. Obviously, more goes into a fit that, but in general terms, you’ll be fine.
Thanks Mac. What stem did you have on there?
Spacers?
I am 5’8.5" and the medium fits just right.
5’9ish on a 54cm Seduza
31 inseam.
Too big or most likely pretty close with the right fit?
5’ 9", ride a 2010 size medium Seduza, seems to work great
33+ inseam, I could NEVER ride a small, i would be better off on a large
I think a 54 will work…but what year is this?
EDIT: I should add that the bike is wicked bad. As in, it F&%#*NG rocks. Scary fast- best bike I’ve owned. It’s such a good deal too- sure for 3x as much you’ll get better…but is that much more worth it? I didn’t think so at this point…
Upgraded Vision bars and Rival crankset w 170s.
Oh, and the Adamo! 
Same as you 5’9" 31 inseam, rode a medium Lucero lite that fit like a glove :0(
.
Upgraded Vision bars and Rival crankset w 170s.
Oh, and the Adamo!
that’ll work (probably), you most likely won’t have much seat post showing…
Mine has upgraded carbon easton and PD bars, carbon stem, Cane Creek carbon brake levers, TRP brakes, FSA K-Force Light crank, dura ace cassette
hella fast
(oh and H3 and Jet 60 help too)
3.5 in of seatpost right now.
I don’t ride steep, but a good 2in of drop to the pads
I think I rode with a 90. Probably 5 cm of spacers.
Thanks Mac - sorry for the ‘20 questions,’ but how about seat setback?
I realize some of it is highly personal, just feeling like I can’t get the fit right…
On the Adamo, I have it pretty far forward on the rails, 100mm stem, and 3-4cm of spacers.
The pads are also on the 2nd setting up (25mm)…
I agree. You’ll be fine. QR’s have quite a bit of adjustability range
I was on an older model that had much more limited adjustability than the current model. I used a Fizik Arione Tri 2 saddle at the time.
The bike should come stock with a 90 mm stem and the seat post should give you about 5 cm of adjustability.
Does anyone know of a quality S bend setup with the Vision base bar?
I have the Vision ski on there now…and want to keep the base, but don’t want the Vision R or straight extensions.
Any suggestions?