QR Seduza seat post question

I just received my new 2006 Seduza (truly a thing of beauty). The question I have, though, is that the seatpost won’t insert further than the point where the seat stays join to the seat tube. Upon inspection, there’s a slight ridge inside the seat tube at this point, and it’s catching the seatpost and preventing further insertion. I can see two alternatives to solve this problem (since the seat’s still probably 1.5 inches away from where I need it to be), and I’d like opinions on the best (read: safest) one.

First, I can try to file down the ridge inside the seat tube, so that the seat post can move past that point (there’s plenty of room below it). I’m worried, though, that it will introduce some structural instability in the frame.

The second option is simply to cut the seat post. I’m not too worried about this option. I’m really more curious as to whether that slight ridge in the seat tube is an anomaly on my frame, and if it would be safe to file it away.

Thanks in advance for any assistance!

cramer

bump
.

one last bump for the lunch crowd :slight_smile:
.

Just call the guys at QR, they will answer your question.

Just call the guys at QR, they will answer your question.

Boy, do I feel stupid! Talk about missing the obvious …

Is it a bad sign when the knee-jerk reaction is to turn to ST for an answer to your problems? :slight_smile:

Thanks, DoubleP!

cramer

No problem, dude!
It is reasonable to call on your ST buddies first when you have questions. In some cases however, you better go directly to the source.

Did you gen answer from QR?

Did you gen answer from QR?

Actually, I called one of the local dealers (a multisport shop, so I know they’re familiar with the bike), and the ridge inside the seat tube is standard. The recommended course of action is cutting the seat post. Rather than deal with measuring, cutting, etc., on my own, I ended up taking it down to the shop and they did it for me in 20 minutes (and for a measly $20).

cramer