Q-rings dilemma

Just trying to install my 54/42 Q-rings and run into this. Unfortunately, I think I know the end conclusion, but any ideas on how to get around this? The FD is all the way up(braze-on) and I don’t think dremmeling the notch larger will give me enough.

Again, I’m assuming the choice will be 1. Get a 53, or 2. Get a 53.
Dammit that pisses me off.

http://i5.photobucket.com/albums/y163/cslone/DSC_0940.jpg

Hi cslone,

Will your bike accept a 57T chainring?

Dremel tool solved the same problem for me.

To be honest Gary, I don’t know, the largest I’ve ever tried was a 55.

Aaron, I’ll give the dremel a try tomorrow, it just looks like it won’t work. What bike is your 54 on?

Not much you can do with a braze on. My Q-rings just fit on my Cervelo SLC with the front der pushed all the way up. Perhaps a different front derailler as well? Campy is nice and all, but maybe an Ultegra one might work? Blasphemy I know …

Nope, no other FD has been able to clear it tonight. I’ve tried Record, Chorus, another Centaur and an Ultegra.

I pulled a 53 Q off another bike and it’s having a problem with clearance on it too. I think the dremel will work for the 53 though. Oh well, we’ll see. Guess the 54/42 is going to the classifieds.

Hello,
You can likely fix it two ways. The first is to drill and tap a second hole in the FD mount. The second is to grind the FD cage a bit, possibly in conjunction with dremelling the braze on.

Styrrell