P3 cable clean up

Triathlon Forum
1

Hi There
I am trying to clean up my P3 cabling from my aero bars to some internal aero bar cabling.
I am running profile cobra integrated bars but they dont support internal cabling to exit at the stem only internal to half way down the aero extensions. Can anyone offer any advice.
Was thinking of switching to the Pro missile evo bars with integrated stem that supports internal cable routing or can anyone suggest some other bars that I could look at.
Jonboy

2

http://forum.slowtwitch.com/gforum.cgi?post=3367262;search_string=cable%20clean%20up;#3367262

http://forum.slowtwitch.com/gforum.cgi?do=post_view_flat;post=3368358;page=1;mh=-1;sb=post_latest_reply;so=ASC

that should get you started.

Post some photos and all the relevant experts will help. Lots of experience on here.

3

As ^^ said, that was my old P3alu (a bit too big) - easy to clean up.

My main suggestion would be not to cut the housing too short the first time around.

Try the vision’s - very cost-effective, and very aero. DON’T route the cables through the extensions. Rather, exit at the nearest point to the shifters, then run along the extensions and over the basebars alongside the stem. That’s what I did. Then tape it down with electrical tape. It was nice and clean.