Lemme know what ya got. Not just a set of clip ons, but a full set up.
Thanks!
here’s what i’ve got: http://forum.slowtwitch.com/cgi-bin/gforum.cgi?post=2824729;search_string=emorydptt;#2824729
These are the same bars used by garmin/slipstream this year.
I’m thinking about selling my Vision integrated bars if you’re interested. Pics here and here. I need the brake levers and shifters so those wouldn’t be coming with it. Extensions are currently uncut and 290mm, though you can see they have the marks on the side to cut them to whatever length you want. I have various spacers to go under the armrests (to give you different armrest heights). There’s also three sets of holes in the armrests to move them in and out as you wish. I also have an aero-shaped spacer to go under the aero-shaped fork attachment to give it a seamless look.
here’s what i’ve got: http://forum.slowtwitch.com/...g=emorydptt;#2824729
These are the same bars used by garmin/slipstream this year.
Thanks, I did see your ad, but the mistrals place everything too low for me, and I don’t want to have to buy extra parts to alter it.
Would love to find some used Brezza’s!
Saw your post. I’m looking for a set just like that.
PM sent
I have a brand new vision tech set including brake levers, semi-integrated, flat bars, and curved extensions (medium size, 40cm). $230 shipped and they’re yours.
Traveling until tuesday but I can send a picture when I get home.
Please send me a pic when you’re home.
Sounds a bit pricey though?
The alloy version: TRIMAX SI FLAT J-BEND is listed at $270 everywhere, without brake levers. Puts them at about $320 with brake levers. That’s 30% off. That does seem like a very reasonable discount to me.
I have a set of Profile T2+ aerobars and base bar. I also have some brake levers that could go with them. If interested, I’ll give you the link to them, or you can just look at my post through my profile. Thanks!
Lemme know what ya got. Not just a set of clip ons, but a full set up.
Thanks!
I have a very slick custom setup I bought from a forum member. Extremely adjustable, all carbon. I just purchased some Uberhunds, so they are available. I wanted to dial in my fit, so they are perfect, light, excellent base bar, and extremely nice to look at!
Info (Taken from JudgeNicks Post)
p for sale is my precious custom aerobar. I commissioned this from Samu Ilonen of Signature Composites, who doesn’t take commissions anymore, and did the best work I’ve ever seen. It took six months and a lot of $ to get this bar. Ultimately, it’s too narrow for me with my current back problems. I LOVE this bar, but I’d be happier knowing it was being put to good use. It’s been raced on a handful of times, fewer than 200 miles on it. Still brand new. Any serious offer considered.
Measurements:
Width (c-c): 42cmLength (armrest rear to extension front): 32.5cmExtension separation (c-c): 11.5cmCups separation (c-c): 19cmCups separation (o-o): 28.5cm
Features:
Totally internal cable routing, cables exit the rear of the bar (very aero)Accepts Visiontech levers with no adapter (lightest levers available)SUPER LIGHT - just 430g complete. I made custom pads that add 9g (for the pair).Zero-degree rise. Flat bar. Stiff as a board.
I will take pictures if interested , I paid Nick 250 , I would sell for 200 + Shipping.
I have a Zipp VukaAero setup w/ integrated carbon levers. PM or email me for more info.
//Edward
I’m about to post up some Bontrager XXX aerobars.
http://www.bontrager.com/model/04049
(in black)
They are in very good condition, but do have some scuffs on the sides. I’ll be taking pictures of them today.
I was going to ask for $280 including shipping (shipping insurance extra).