Mounting tubulars, valve extenders and tufo tape vs. glue?

I have looked up some threads on valve extenders for tubular zipps - but still have a couple questions…

"Yes. As long as your tires are conti’s or Vittoria. You remove the core and insert the extender and then screw the core into the top of the extender. "

just got 404’s… have a new Vittoria Corsa Evo CX I want to mount… I think i understand that you take out the core, screw on the extender and then screw the core back on top of the extender - a couple ?:

  1. how do you remove the core without messing up the threads - tried it by hand and it didn’t come out
  2. is it recommended to put teflon tape or glue on all threads (where top and bottom of extender meet tire and core) - what kind of tape should be used?
  3. I have the tufo tape for mounting the tire - any pref. tape vs. glue?.. obviously it will be less messy - but i would think in the event of a flat during a race I would benefit from the layer of glue already being on the rim?? (these are used wheels so their is probably some glue on it already)
  4. maybe a dumb question - does it matter which direction this tire mounts - can’t really tell a difference…

Thanks!

  1. TUFO has a cool little tool to remove the core. Otherwise I use Lineman’s pliers
  2. I do
  3. I’m a tape kida guy
  4. The tire logo goes on the drive side. I don’t think the CX 1’s have a specified direction

about the Tufo tape - if you use the Xtreme Tufo, there are 3 layers of tacky tape. The first layer adheres to the rim when you put the tape on. The next layer is exposed after you put the tire on and pull the plastic piece off to adhere the tire to the top of the tape. The third layer will be exposed when you flat and remove the flat tire. Removing the flat will expose a third layer, sticky enough to finish the race and not worry about the tire coming off. I’ve used lots of Tufo tape and its great stuff.

thanks guys it is helpful…

any other opinions on tape vs. glue are welcome…

Tape is cleaner than glue and claims that you can ride it right away, for some brands. I have not tried it, but if I had to glue a tire I likely would try tape.

  1. cool littlle wrench from tufo.
  2. I tired teflon tape and it did not work (too tight) so I use no tape.
  3. Glue = faster or so everyone says. My tufo’s/tape combo was REALLY slow.
  4. no idea - maybe mine are backwards…

Dave