Hed 3 front vs Hed Jet 90 front

Looking for a new front wheel for racing in 2007. The past few years I’ve ridden on a Hed-3 front with a disc rear. I like this combo but the Hed-3 has become pretty badly out of true so I’m looking at options.

I’m considering going to a Jet 90 for my front, how is it in side winds? I can handle the Hed-3 fairly well in the windy conditions that are normal here in Texas but is the Jet 90 even tougher to handle?

How about the aerodynamics between the two. I’m thinking there is no real world difference, maybe the Hed-3 is a tad faster…

Thanks for any comments

as far as aerodynamics, buy the wheel data test at www.biketechreview.com he puts both of those wheels in the wind tunnel.

Just a bit north of you and I’ve raced the Jet 90 front in several very windy races, no problem. I wouldn’t be surprised if the handling is better than a Hed 3.

I love my Jet 90 and think it is an excellent wheel on it’s own and even better considering the price. I’ll ride that wheel in any wind the RD will considering holding the race in.

Doesn’t Hed have the Jet 90 and Hed 3 aero data on their website?

Hed 3’s are probably faster on an “absolute” scale but if you’re a regular guy who has to purchase and maintain his own equipment then a Zipp or Hed spoked front is easier to live with if you are concerned about how true your wheels are. You can always true a spoked wheel. Can you send a H3 back to Hed to improve the runout?

" Can you send a H3 back to Hed to improve the runout?"

I’ve spoken to someone at Hed about that. Frankly I don’t hold out much hope but I really don’t know.

To me the replacement trade in from Hed doesn’t seem like that much of a bargin. It it can’t be fixed I’ll just keep it or sell it cheap.

Just a bit north of you and I’ve raced the Jet 90 front in several very windy races, no problem. I wouldn’t be surprised if the handling is better than a Hed 3.

I love my Jet 90 and think it is an excellent wheel on it’s own and even better considering the price. I’ll ride that wheel in any wind the RD will considering holding the race in.

Doesn’t Hed have the Jet 90 and Hed 3 aero data on their website?

H3’s can’t come out of true in the traditional sense. However, there are shims in the hub assembly that can shift. That being said, I haven’t had it happen to any of the wheels I’ve sold in Canada over the 3 years I’ve been the distributor here. I don’t know who you spoke to a HED, but I have found them to be very responsive in terms of service. If I were you I would call & speak to Kris or Andy. I am convinced they will help you.

In terms of wheel choice, I would select the H3 with no hesitation.