I have an Elite Razor, which is one of the most praised tri-bikes around. It is made of Easton Scandium and was custom build and painted in the USA. This is a 2003 model. A new one with ultegra components would run you about $4200, but I am willing to let it go for $1500**…Wait MAKE THAT ONLY 1350!** (CFO says I need to sell one tri bike before buying another and it is coming soon)
Why am I selling? I bought it used without properly getting measured. The previous owner was the same height as me, but he had a short torso and long legs. I have a long torso and short legs, so it does not work for me. Now that I have learned my lesson, I will get measured and buy a bike that will fit me.
Though my 2 seasons with it has gone well, its is time to try something else. It is a GREAT BIKE!
As far as sizing goes, this bike is well suited for somebody around 6’1"-6"3 with a short torso and longer legs.
I would prefer Paypal as payment
Frame Measurements:
Seat tube length (BB to top tube): 57 CM
BB to top of collar: 68 CM
Top Tube: 51 CM
Steerer Tube: 16.5 CM (from headset to headset)
Standover: 81 CM
Chainstay: 42 CM
Downtube: 72.? degree
Seat tube angle: 76 or 76.5 degree ( I Failed geometry)
Component Measurements:
Ultegra (2003?) Crank Length: 180 MM
ITM Millenium Stem : 90 MM
Components:
Front Derailleur: Ultegra
Rear Derailleur (9speed): Ultegra
Brakes: Ultegra Brakes
Headset:Chris King
Fork: Reynolds Ouzo Fork
Profile Aerolite Bars
Brake Levers: Dia Compe
Bar End Shifters: Shimano
Seatpost: Bontrager Carbon
Wheels: Bontrager Select
Tires: Michelin Pro Race 2
Saddle (which I will keep, unless you really want it): Blackwell Flow I also have a Koobi Zenon, if that seat would work better.
Colors and cosmetic damage:
Blue and white with a slight metallic sparkle
White seat and handlebar tape
scratches on one of the seat stays, due to transportation mishap (which I touched up)
cable rub on the steerer tube paint
