A small hole (not all the way through and hanging on) on a carbon disc.
- put a piece of tape on it and ride?
- epoxy/chemicals…of some sort (if so name em’)
tks
I’d just put some clear nail polish on it.
Yeah, something like Jim said. Just to ensure that the loose strands don’t fray…or to stabilize it. Then I’d drop some tape over it just to keep it from being disturbed.
any type of type? electrical
Sure. Anything that will stay put. Electrical is probably your best bet. Plus being black, it will blend in better.
Or you can get a sticker of some sort and apply it for decoration.
You can buy a one time epoxy kit from here. I buy CF from them and the kits are great for small projects.
http://sollercomposites.com/...sites/Epoxy0308.html
Well I just looked and cant find the small kits, I’d call and ask them…super good guy who’ll help you with any questions. They used to have one use 1/2oz kits…all i can find now is an 8oz kit. If they dont have them I would go to an automotive or marine shop and see if you can find a small container of two part epoxy for fiberglass repair…not the kind you would find to glue thing together though in the tubes…something that is light and will smooth out and fill the hole. Once it’s dried you can sand it smooth with some 800grit sandpaper, the black kind.
Here it is, it is the repair pack, unfortunately they only sell it in packs of 6…maybe you can find a single someplace. I may actually have one. I’ll look when I get home Saturday if your interested.
make it all dimpled
.
Dab of * Clear Nail Polish*, then ride.
electrical tape or go to advanced Auto parts and get this carbon fiber sticker paper that they sell for cheesy faux-carbon trim on cars.