That however does not work in the real world. Some of us have a more flexy spine than others - some can only come close to perfect and go from there. I have seen many people set up “super aero” and be so uncomfortable that they can not even ride more than 20 miles. Start with a mirror, then go by feel. I am also a big proponent of sizing while on an actual ride, or trainer ride. What you can do for 30 seconds while holding in your gut in a mirror at a shop does not show you what you can do after some seat time.
Oh…and let there be no question that there is NO shop in Rockford that is capable of properly fitting a Tri bike - none. I dont care what the yellow page add claims. Go to Mission Bay if you want to get sized, Bill knows whats up. (sometimes ;-P)
I totally agree with the going by feel and riding. I for one have always been striving for a lower front end and have gotten a great short TT set up, but at ralphs it really kicked me in the ass. Literally, it felt like my glutes were baseballs they were so tight at the end of the bike. I’m going to make some changes again to see if I can remedy the problem, but intend to go slightly higher in front. It takes a while to adapt and it takes even longer to figure out how low you can go in front.
“Oh…and let there be no question that there is NO shop in Rockford that is capable of properly fitting a Tri bike”
I agree with you on that and thus the reason I want to gather as many “resources” on the subject as possible.
I’m hoping I can get “close” enough to avoid being on the wrong size frame and hopefully be able to tweak thinks in if need be. I survived 3 years on my first purchase, bike unseen from E-bay…it can only get better one would think
I’d also agree that I’d probably be better served going to Mission Bay or elsewhere, probably be even better served going and seeing Tom. However it’s rather important to me to support the locals.
Hopefully as the local scene gets larger someone will take the inititive to become a “Local” expert on tri fitting or fitting in general. However if they don’t see the need they won’t take the leap.
“I have seen many people set up “super aero” and be so uncomfortable that they can not even ride more than 20 miles.”
Like I said I’m going to shoot for something “in the middle” and go for comfort first. Luckily I’m fairly to very flexible and am also hoping that will give me a bit of leeway.
My whole approach is to go to the LBS that has the Fit machine and set it up to the different bike size’s and frame I’m looking at. I can then ride on that size frame. I’ll bring the digital camera and take some pictures and see what I look like on the different frames and sizes.
Anyway if I don’t like the way I look or fit…I won’t buy. Not a utopian situation but one I’m willing to work with.