Does anyone know of a good clearcoat paint brand to cover decaling on a bike helmet. I re-decaled the design of my Bell Meteor II helmet to match my 2006 Scott Plasma Team TT bike and would like to help protect the design if possible.
Thanks, Glen


Does anyone know of a good clearcoat paint brand to cover decaling on a bike helmet. I re-decaled the design of my Bell Meteor II helmet to match my 2006 Scott Plasma Team TT bike and would like to help protect the design if possible.
Thanks, Glen


No idea but it looks nice. Was it a decal kit or did you make them yourself? What kind of kit do you wear? I’d assume matching.
depends. Do you have a gun or are you looking for rattle can? You might just call a local body shop or custom car place and ask what they would charge to lay down a single coat of clear on it. I’m betting it would be pretty damn cheap.
Whos did the decal work?
That looks rad, we need details! Where did you get those? do them yourself? etc.
Please, don’t hold out.
That’s awesome! If they are vinyl decals I wouldn’t even worrry about clearcoating it, depending on the type of vinyl they are you’re good for years and the only thing you need to worry about is peeling if you snag an edge on something. But if you do want to clear coat it I’d go to a motorcycle shop or autoshop, maybe you can do the masking for them (mainly blocking off hte vents and the head opening and just see if they can spray it with poly clear when they spray something else to keep the costs down. Personally I haven’t had much luck with spray can clear coats but maybe you’ll find something I didn’t. Again, cool helmet.
All,
Thanks for the kind comments about the design, I will try and answer the questions from the responses. I can apply the clearcoat either from a spray can or a spayer as I have this equipment. I wanted to do this becuase the decals that came with this helmet was starting to peal from the factory. I purchased decal material from a decal shop in Michigan and cut patterns from cardboard and then transfered the shap to the material and then applied to the helmet. Decal material is pretty inexpensive if you go this way.
I do not have a kit (clothing that this matches yet but am looking for a skinsuit to match the bike colors (see below) if possible. I mainly race TT’s in the central Indiana area and not really tied into a race shop for any team apparel. I purchased this bike from A-1 Cyclery in Indianapolis and was treated really well. Any suggestions on clothing options would be greatly appriciated.
Thanks, Glen

use the sprayer if you want a really nice high gloss finish
Again, I do custom decal work out of computer cut vinyl, the same stuff you probably got from the sign shop and honestly you probably don’t have to seal it but it is a killer job so maybe it’ll be worth it.
Tai,
Thank you for the advice, I think that I will leave it alone for now unless I have issues with the decals pealing. Once I get my final race wheels, leaning toward HED3 in front and Renn disc in back, I need to get with you so that we can work up a design for them to match the bike and helmet.
Thanks again, Glen
just let me know, as you already have the bike and helmet to match too it would be pretty easy to come up with a sleek design to match for your wheels. anyways, nice again on the helmet.
Hey, a last note, if you don’t want to clear coat the helmet but are worried about the decals peeling then you could buy a Seal-It pen, I think that’s what’s it’s called at least. You can find them at vinyl supply places or if you search online a bit you can probalby find one. It’s like a paint pen that dispenses a clear poly coat, you just paint it over all the edges and it seals everything down invisibly. It’s usually used to seal window graphics on.
Tai,
That sounds like great advise, I will check into the sealing pen and see what is all available.
Thanks, Glen
i’m planning on doing the TTs south of indy this year. I look forward to seeing you out there. Cool bike and helmet.
i’m planning on doing the TTs south of indy this year. I look forward to seeing you out there. Cool bike and helmet.
Dan,
I am really new to the TT scene so I am still trying fiqure out the equipment to use but A1 Cyclery is helping me get started right. I ran three TT’s late last year and realized how much work I need to put in to get the engine up to speed. Hopefully we will see you out there, I plan on running TT’s all year.
Glen
glen, mat steinmetz whom you may know is selling a h3 front and zipp disk rear. He lives over by eagle creek so you could see them first and wouldn’t have to pay shipping. and he already has the decals off so you would be able to make them match your bike.