I know…I know…before we get started here…let me back up. When I mentioned to my family that I started training for triathlon, my mom’s first question was…what are you going to do about a bike? I told her I’ll be on the lookout for something used…and for her to keep an eye out in Georgia for something with a road flavor. She went to a few bike shops asked around…guy walks out with an AMF scorcher. Next time she came back for a visit she layed it on me. Well of course it’s waaaaay to small for me, does not shift and the tires were horrible… but it was the thought that counts. I later found my current 05 QR Kilo in prestine condition with all the goodies for 800 bucks. I’m in business…I hung the AMF up in the garage. I’ve been at it for right at 18 weeks now and my wife has gotten the tri-flu and is on week 5 of the 11 weeker I started with. She has been tooling around on a old trek mountain bike and she is really showing progress so I want to get her a road bike…The AMF is just about her size…sooooo…has anyone had luck with taking an older bike like this AMF scorcher and putting some new components on it. I figure it would be cheaper than getting a newer model and if she does take to racing we can get her a proper tri-bike and if she does not then we can just hang it back up without breaking the bank. Any thoughts???
Let me add that the frame is in really good shape.
That is an old welded Raleigh steel frame - you have two issues - what is the bottom bracket. and what is the rear spacing. You could cold set the rear to take 7 speed, 8-10 may be pushing it. Once you have the rear set tot take more modern cassettes, as long as the BB allows you to upgrade to new crank/rings - you are home free. I would guress seatpost and steerer are pretty standard, and you can get some nice quill stems if needed, or go to a conversion.
Isn’t that also 650 wheels? You may need a bit of work there as well.
It’s a 10 speed so I think I’m good there. I’m worried about the crank…it looks smallish…and I’m not sure about the wheels…I’ll have to check. Does a bike like this typically ride decent if you can everything to work or are they fickle??
Like any frame - that is hard to say - depends on geometry. That said, Raleigh tends to be more conservative in their geometry - so think century cruiser more than crit. It will probably be sluggish for a modern road bike, but that may be a nice thing for tri, if you are going to try to get clip ons etc…
Like any frame - that is hard to say - depends on geometry. That said, Raleigh tends to be more conservative in their geometry - so think century cruiser more than crit. It will probably be sluggish for a modern road bike, but that may be a nice thing for tri, if you are going to try to get clip ons etc…
Might not be a bad idea…I think a little sluggish will not be a bad thing for my wife. Might be better than a twitchy tri-bike for her first go at it. I’ll bring it down to my LBS and see what’s up as far as compatibility issues…then take it from there. I’m hoping I can put tiagra or Sora on it at least.