Of course you can see how it looks on Omni, those are all the same components - http://www.TriRig.com/Omni

Or you can see a bunch of other customer rigs we have featured here: https://www.tririg.com/...New_Age_Grouper_Rigs

Or a very nice P-Series Disc with Alpha One and Delta, here: https://www.tririg.com/...tom_Cervelo_P_Series

Or check out the photo roll on our Facebook page at http://www.Facebook.com/TriRig

Hope that helps!

---

--
TriRig.com

What rear bottle holder is shown in the pic of you (?) on the Omni on this website page??

https://www.tririg.com/

I'm running that. Will send pictures in a day or two...bike is in some pieces undergoing an overhaul.

It's mostly OK. I've had am issue with the Delta cover slipping down, for example on really hard bumps. This is bad because the front tire catches the Delta, and flings it off. Fortunately the two times it happened, nothing was damaged (and it wasn't in races). I'm considering using nuts on the set screws used for retention to avoid that. Or some other method. There's a very real chance this is all some sort of installation bungle on my end, but it *looks* OK when installed, to me.

Did you use the L-shaped tape on the fork legs?

Also if your bars are slammed right above the Delta, you can swap the set screws for button head screws and that makes it VERY secure.

---

--
TriRig.com

That one is a custom bit made by Dash Cycles. Not sure if they still make them.

---

--
TriRig.com

Ah, forgot about that critical point. I did originally, but it got bungled up after taking the Delta off a few times for brake adjustments, etc. And haven't found a nice tape to replace it with yet. Which is certainly another option.

Using head screws is great. Super secure and then you don't have to bother with taping and removing tape everytime it comes off. I have some L shaped tape around and I honestly had no idea what it was for until now haha

---

Benjamin Deal - Professional - Instagram - TriRig - Lodi Cyclery
Deals on Wheels - Results, schedule, videos, sponsors

I also put screws into mine. Rock solid and doesn’t move. Without them the cover would rub my tire.

---

Favorite Gear: Dimond | Cadex | Desoto Sport | Hoka One One

Where are you installing screws to hold the Delta in place? I'm not a huge fan of the tape method.

yes would love to see some pictures of that... thank you all

---

Tridad