Just received this email
Description: This recall involves Profile Design Aeria Ultimate carbon aerobars sold individually and as an original equipment upgrade on consumer configurable Dimond Brand Bikes and Quintana Roo model bicycles. The aerobars were sold in one size and are all matte black in color. “Profile Design” and “Ultimate” are embossed in gloss black on the top of the rear edge of the aerobars. The best way to identify recalled handlebars is to measure the uncut hand extensions from leading edge of wing to tip of hand extension (where brake lever is placed). On recalled bars it is 13.6 cm (5.3 in) measured from leading edge of wing.
Hazard: The bicycle aerobars can crack and break, causing the rider to lose control and crash.
Incidents/Injuries: The firm has received two reports of the bicycle aerobars cracking or breaking. There have been no reports of injuries.
Sold at: Independent bicycle stores nationwide from May 2017 through October 2018 for about $1,300.00 for the aerobar sold individually or between $5,200.00 and $14,000.00 as original equipment on bicycles.
Remedy: Replace
Consumers should IMMEDIATELY STOP USING BICYCLES WITH THE RECALLED AEROBARS and contact Profile Design for instructions to receive a free replacement aerobar via their local retailer. Find a Dealer
Consumer Contact: Consumers can call Profile Design toll-free at 888-800-5999 extension. 172 from 9 a.m. to 5 p.m. PT Monday through Friday or fill out the information below to be contacted by Profile Design about the replacement process.
Consumers or retailers outside of USA: Please contact your local distributor for more information http://www.profile-design.com/...ealer-international/
Description: This recall involves Profile Design Aeria Ultimate carbon aerobars sold individually and as an original equipment upgrade on consumer configurable Dimond Brand Bikes and Quintana Roo model bicycles. The aerobars were sold in one size and are all matte black in color. “Profile Design” and “Ultimate” are embossed in gloss black on the top of the rear edge of the aerobars. The best way to identify recalled handlebars is to measure the uncut hand extensions from leading edge of wing to tip of hand extension (where brake lever is placed). On recalled bars it is 13.6 cm (5.3 in) measured from leading edge of wing.
Hazard: The bicycle aerobars can crack and break, causing the rider to lose control and crash.
Incidents/Injuries: The firm has received two reports of the bicycle aerobars cracking or breaking. There have been no reports of injuries.
Sold at: Independent bicycle stores nationwide from May 2017 through October 2018 for about $1,300.00 for the aerobar sold individually or between $5,200.00 and $14,000.00 as original equipment on bicycles.
Remedy: Replace
Consumers should IMMEDIATELY STOP USING BICYCLES WITH THE RECALLED AEROBARS and contact Profile Design for instructions to receive a free replacement aerobar via their local retailer. Find a Dealer
Consumer Contact: Consumers can call Profile Design toll-free at 888-800-5999 extension. 172 from 9 a.m. to 5 p.m. PT Monday through Friday or fill out the information below to be contacted by Profile Design about the replacement process.
Consumers or retailers outside of USA: Please contact your local distributor for more information http://www.profile-design.com/...ealer-international/