Recabling my 2014 P3. Apparently I should remove the plastic bracket under the bottom bracket. Removed the single self-tapping screw but cannot get bracket off. Prying hard with flat blade screwdriver, any harder and I'll break the plastic. Is there a trick to this? Slide it maybe? Googled extensively and found no mention.
Triathlon Forum
Login required to started new threads
Login required to post replies
Re: P3 BB cable guide removal [garydunn808]
[ In reply to ]
you mean 2013 p3? 2014 was NP3 and no screw needed on the bracket that very difficultly snaps in(I use needle nose pliers to grab it)
Re: P3 BB cable guide removal [jeffp]
[ In reply to ]
Sorry yes probably 2013. Pliers, grab and wiggle? REALLY don't want to break it. Thanks for the reply.
Re: P3 BB cable guide removal [garydunn808]
[ In reply to ]
no clue for you, just pointing out 2014 model did not have a screw
Re: P3 BB cable guide removal [garydunn808]
[ In reply to ]
garydunn808 wrote:
Recabling my 2014 P3. Apparently I should remove the plastic bracket under the bottom bracket. Removed the single self-tapping screw but cannot get bracket off. Prying hard with flat blade screwdriver, any harder and I'll break the plastic. Is there a trick to this? Slide it maybe? Googled extensively and found no mention.why do you need to remove it?
Swimming Workout of the Day:
Favourite Swim Sets:
2020 National Masters Champion - M50-54 - 50m Butterfly
I have a 2014 NP2 and 2014 NP3. Both have a small screw on the BB cable guide. Still need to use a flat head screw driver to pop it out, though. Not sure what the screw does.
No coasting in running and no crying in baseball
No coasting in running and no crying in baseball