So went to drop a Flo 90 11 speed into by Wilier and the 11 tooth cog/lock ring is rubbing against the frame. This isnt happening with the stock wheels obviously. Any thoughts or suggestions?
Banger
Banger
Triathlon Forum
Login required to started new threads
Login required to post replies
Re: Flo 90 -11 speed not fitting in frame [banger]
[ In reply to ]
Is the lockring tight?
Re: Flo 90 -11 speed not fitting in frame [jimatbeyond]
[ In reply to ]
Yupper - tried a couple more times
Banger
Banger
Re: Flo 90 -11 speed not fitting in frame [banger]
[ In reply to ]
You don’t have the 10 speed spacer on by accident do you?
2019 T-Rex Tri Series
2019 T-Rex Tri Series
Re: Flo 90 -11 speed not fitting in frame [mknight84]
[ In reply to ]
Yep, take the cassette off and look for an extra spacer.
Re: Flo 90 -11 speed not fitting in frame [banger]
[ In reply to ]
Make sure the last cog is actually keyed correctly, it can sit and look good without the wide segment in the right place due to the way it overhangs.
This will prevent it from fully seating.
Make sure that the freehub body is fully seated.
This will prevent it from fully seating.
Make sure that the freehub body is fully seated.
lyrrad wrote:
Make sure the last cog is actually keyed correctly, it can sit and look good without the wide segment in the right place due to the way it overhangs. This will prevent it from fully seating.
Make sure that the freehub body is fully seated.
+1 - I've done that before.