Somehow I ended up with 4 Powertap wheels... time to thin them out. I have a pair of wired Powertap wheels, I used one for training and one for racing. I kept my race rubber and the disc cover on one, and the other was the training wheel. I was too lazy to keep taking the wheelcover (not included, I am keeping that) off and swapping out the race tire, so this was an easy way to switch back and forth. What I have:
Pictures are here:
http://dl.dropbox.com/...03-30%2018.59.06.jpg (Velocity Deep V)
http://dl.dropbox.com/...03-30%2018.59.41.jpg (Velocity Deep V close up)
http://dl.dropbox.com/...03-30%2018.59.18.jpg (DT Swiss)
http://dl.dropbox.com/...03-30%2018.59.31.jpg (DT Swiss close up)
http://dl.dropbox.com/...03-30%2018.55.13.jpg (Wiring harnesses)
http://dl.dropbox.com/...04-01%2020.03.31.jpg (Case, USB Cradle, etc.. LYC not pictured, looks like every other one you have ever seen).
I am certainly willing to split this up but first I'd like to see if anyone wants all of the above. If I can get a taker for all of it I will sell for $600 plus actual shipping cost to you. If you are interested let me know, thanks.
- One Velocity Deep V 32 spoke Powertap Comp wired. I purchased this in February 2010 off of someone that had only ridden it 34 miles and decided it was not for him. I have since moved that total up to 1,427 miles total according to my SportTracks software. It works fine but I think it goes through batteries pretty quickly; I bought a bunch of batteries off of ebay for it (which could be part of the problem) but for whatever reason it seems to go through a set of batteries quicker than the other wheel.
- One DT Swiss RR 1.1 Powertap SL wired. This wheel was purchased used in 2009 and I have no idea how many miles are on it. When I was cleaning it up to sell I noticed some nicks in the spokes on the drive side, like maybe the chain had fallen into them at one time, but it's likely been that way the entire time as I don't ever recall that happening. I just mention it for full disclosure. Otherwise I think the wheel looks good.
- A pair of shark fin wiring harnesses. I had one on my road bike and one on my tri bike so I could switch wheels between the two bikes. They both have the cadence wire. I will probably keep one of the cadence magnets for my Garmin, so expect to get one with a cadence magnet and I will throw in the generic magnet from Radio Shack that I taped to the crank from time to time if you want crank cadence.... usually I just used the hub cadence reading for the tri bike and didn't fool with the cadence wire or magnet.
- The soft case, a USB download cradle, one little yellow computer, and the tool for taking off the battery cover.
Pictures are here:
http://dl.dropbox.com/...03-30%2018.59.06.jpg (Velocity Deep V)
http://dl.dropbox.com/...03-30%2018.59.41.jpg (Velocity Deep V close up)
http://dl.dropbox.com/...03-30%2018.59.18.jpg (DT Swiss)
http://dl.dropbox.com/...03-30%2018.59.31.jpg (DT Swiss close up)
http://dl.dropbox.com/...03-30%2018.55.13.jpg (Wiring harnesses)
http://dl.dropbox.com/...04-01%2020.03.31.jpg (Case, USB Cradle, etc.. LYC not pictured, looks like every other one you have ever seen).
I am certainly willing to split this up but first I'd like to see if anyone wants all of the above. If I can get a taker for all of it I will sell for $600 plus actual shipping cost to you. If you are interested let me know, thanks.