I never imagined that I would get rid of this, but after 5 years of being out of shape and no prospects of riding this anytime soon, it's time for it to go. I slowly built this up and rode it 1x. Nearly all parts were used when I put this together, aside from the Dash saddle and front Omega-X brake.
Cervelo P3C, frame with seatpost and Cervelo FK26 fork (from a newer model P2)
3T Ventus bars, -17d, cam-tail trimmed at back of steered by previous owner, it has been laid down and the left side is scratched but absolutely no problems with strength or functionality. As seen in photo, new grips included as well as spacers for steerer and elbow pads. There is some adhesive residue at the tops of the wing from when I tried putting pads right on the wings - I will get that cleaned off.
Dura-Ace 7970 TT shift bits. RD scratched from crash (from different bike) but 100% operational. Homemade OSPW from an old 9-spd Dura-Ace cage and KCNC Ceramic 12T pulleys (used for 1 ride). Custom shift buttons glued to right brake lever (see pic). Stock Dura-Ace Di2 buttons at the ends of extensions. Wiring harness is external and taped to the frame. Custom battery is ziptied to NDS chainstay (out of the wind). Battery charger is included.
Hawk BB for 24mm cranks
Dash Stage.9 saddle, used 1x
TriRig Omega-X front brake, Omega rear brake. I still have the original box for the Omega-X with all the extra mounting bits.
Hed3 clincher rear wheel (700c) with new 22mm Vittoria Open Corsa SL tire
Fulcrum Racing 5 front wheel
just needs cranks and chain to ride
$1500 shipped in the USA
If this doesn't sell within ~2 weeks then I will part it out. If you are interested in something other than the complete package post up here or PM me with offers and I might split it up sooner.
Cervelo P3C, frame with seatpost and Cervelo FK26 fork (from a newer model P2)
3T Ventus bars, -17d, cam-tail trimmed at back of steered by previous owner, it has been laid down and the left side is scratched but absolutely no problems with strength or functionality. As seen in photo, new grips included as well as spacers for steerer and elbow pads. There is some adhesive residue at the tops of the wing from when I tried putting pads right on the wings - I will get that cleaned off.
Dura-Ace 7970 TT shift bits. RD scratched from crash (from different bike) but 100% operational. Homemade OSPW from an old 9-spd Dura-Ace cage and KCNC Ceramic 12T pulleys (used for 1 ride). Custom shift buttons glued to right brake lever (see pic). Stock Dura-Ace Di2 buttons at the ends of extensions. Wiring harness is external and taped to the frame. Custom battery is ziptied to NDS chainstay (out of the wind). Battery charger is included.
Hawk BB for 24mm cranks
Dash Stage.9 saddle, used 1x
TriRig Omega-X front brake, Omega rear brake. I still have the original box for the Omega-X with all the extra mounting bits.
Hed3 clincher rear wheel (700c) with new 22mm Vittoria Open Corsa SL tire
Fulcrum Racing 5 front wheel
just needs cranks and chain to ride
$1500 shipped in the USA
If this doesn't sell within ~2 weeks then I will part it out. If you are interested in something other than the complete package post up here or PM me with offers and I might split it up sooner.
Last edited by:
pritchet74: Dec 7, 19 8:11