the quarq dzero dub spider will work with 10 and 11 speed chainrings. you need the quarq dub cranks/spindle and a dub BB to go with it though

---

the world's still turning? >>>>>>> the world's still turning

I forgot to mention my bike takes GXP, so I don't think the DUB sill work. Not sure though.

---

http://www.desotosport.com
http://www.ceepo.com

Dub and GXP have different spindle diameters, so they're not compatible. Dub is 28.99mm and GXP is 24mm on drive side and 22mm on non-drive side.

I'm not familiar with the quarq offerings, but if you're looking for alternatives with the Force 22 groupset- you could go with a power2max spider instead. I just picked up a Force 22 GXP crank last week and replaced the spider with a p2m ngeco meter. It mounts with the 3bolt spider pattern and was a simple swap.

what kind of bike are you building up? there are tons of BB conversions out there, I'd be surprised if you couldn't get a Dub BB on there somehow.

---

the world's still turning? >>>>>>> the world's still turning

It’s a Waterford 2200, circa 1999 or 2000. Getting it reconditioned.

---

http://www.desotosport.com
http://www.ceepo.com

if it's a simple threaded BB then something like this should work, I think:

https://wheelsmfg.com/...ub-cranks-black.html

---

the world's still turning? >>>>>>> the world's still turning

both the current force and red crank arm assemblies are offered in 24mm spindles. (FKA GXP)

GXP axles are 24mm on the drive side and 22mm on the non-drive side.