It is interesting, according to a YouTube video, If you use 6 mm tri line knifeless tape, apparently it's possible to make almost seamless butted joints.

Did you consider mixing colors or designs? Or is that much harder?

Nope. I guarantee the vinyl will shrink back a little, especially anywhere it was stretched. It’s why we overlap panels on wall murals or when needed on vehicles.

I over lapped most seams by half the width of the knifeless tape. Last thing I wanted was to miss a seam and the have the white paint underneath visible with the black.

Nope. I guarantee the vinyl will shrink back a little, especially anywhere it was stretched. It’s why we overlap panels on wall murals or when needed on vehicles.

Great info, thank you. I did not know about the knifeless tape, that could be a huge help. I have used some of the car wrap in a few spots on my P3 but wrapping the whole frame seemed to be an impossibly time consuming job.

But maybe not so much anymore. Another question, would you guess that a hair blow dryer would be a sufficient substitute for a heat gun?

Then, how much of the knifeless tape do you estimate that you used, 25% of the roll? More?