Frameset is sold, still available is:
-Sram GXP Blackbox ceramic BB for $40
-Xlab Sonic Wing rear bottle carrier (for multiple bottles) -$15 https://www.xlab-usa.com/sonic-wing.html
-Xlab Delta 300 single rear bottle carrier - $20 https://www.xlab-usa.com/delta-300.html
-Beaker Concepts rear bottle carrier (for multiple bottles) - $15
Rear bottle carriers do not come with bottle cages.
- 2011 Cervelo P4 frameset (56cm)
- Pretty good condition overall, with some issues
(i've been riding it for the past 4 years approx ~5,000km, unsure of previous use as i'm the 2nd owner, but it's virtually in the same condition that i got it in)
The issues include:
-damaged seatpost (clamp was overtorqued, which crushed the seatpost a bit. I've been riding it as is, but it really should be replaced)
Now have a new (used) un-damaged seatpost
-rear dropout screws are stuck (wasn't an issue, just have to set the rear wheel straight by hand before you clamp the quick release)
-paint chips on rear seat stay and toptube (i had the local Cervelo dealership check them both out and was advised they were both only aesthetic and safe to ride)
-rear derailleur cable hole was drilled out for Di2 cable (i have been running mechanical shifting with a cable stop inserted into the hole and taped over for extra security)
- The P4 integrated bottle has been cut for use as a flat kit including spare tube, CO2 inflator & cartridge, tire lever, and a multitool.
Asking $700USD for the frameset
[URL=http://s87.photobucket.com/...P4%20frame6.jpg.html][/url]
[URL=http://s87.photobucket.com/...P4%20frame2.jpg.html][/url]
[URL=http://s87.photobucket.com/...P4%20frame5.jpg.html][/url]
[URL=http://s87.photobucket.com/...P4%20frame1.jpg.html][/url]
[URL=http://s87.photobucket.com/...P4%20frame4.jpg.html][/url]
[URL=http://s87.photobucket.com/...P4%20frame3.jpg.html][/url]
-Sram GXP Blackbox ceramic BB for $40
-Xlab Sonic Wing rear bottle carrier (for multiple bottles) -$15 https://www.xlab-usa.com/sonic-wing.html
-Xlab Delta 300 single rear bottle carrier - $20 https://www.xlab-usa.com/delta-300.html
-Beaker Concepts rear bottle carrier (for multiple bottles) - $15
Rear bottle carriers do not come with bottle cages.
- 2011 Cervelo P4 frameset (56cm)
The issues include:
Now have a new (used) un-damaged seatpost
-rear dropout screws are stuck (wasn't an issue, just have to set the rear wheel straight by hand before you clamp the quick release)
-paint chips on rear seat stay and toptube (i had the local Cervelo dealership check them both out and was advised they were both only aesthetic and safe to ride)
-rear derailleur cable hole was drilled out for Di2 cable (i have been running mechanical shifting with a cable stop inserted into the hole and taped over for extra security)
- The P4 integrated bottle has been cut for use as a flat kit including spare tube, CO2 inflator & cartridge, tire lever, and a multitool.
Asking $700USD for the frameset
[URL=http://s87.photobucket.com/...P4%20frame6.jpg.html][/url]
[URL=http://s87.photobucket.com/...P4%20frame2.jpg.html][/url]
[URL=http://s87.photobucket.com/...P4%20frame5.jpg.html][/url]
[URL=http://s87.photobucket.com/...P4%20frame1.jpg.html][/url]
[URL=http://s87.photobucket.com/...P4%20frame4.jpg.html][/url]
[URL=http://s87.photobucket.com/...P4%20frame3.jpg.html][/url]