Login required to started new threads

Login required to post replies

Prev Next
Re: Cervelo P-Series frame triangle storage solution [yannb] [ In reply to ]
Quote | Reply
Love the idea. Got me thinking...why not take an off-the-shelf storage solution (for example the Felt IA BTSpac) and then 3D print the custom mount. Coincidentally before I saw your photo was looking at how to do so on my Giant Trinity Advanced Pro. A 3D bracket with an upper attachment around the seat post, a body with two bosses to attach the BTSpac and a lower attachment that zipties around the rear stays.
Quote Reply
Re: Cervelo P-Series frame triangle storage solution [ktm520] [ In reply to ]
Quote | Reply
Hi ktm520

I've posted the 3d stl file for my 54cm Cervelo P5 on cgtrader, https://www.cgtrader.com/...-p5-rear-storage-box. You can purchase the stl file for $30.

Yann

http://www.custombikexcessories.com
Instagram
Facebook
Quote Reply
Re: Cervelo P-Series frame triangle storage solution [yannb] [ In reply to ]
Quote | Reply
Hi

Anyone have made a modell for the triangel on the P2/P3?

I might be able to produce them at a resonable Cost.
Quote Reply
Re: Cervelo P-Series frame triangle storage solution [yannb] [ In reply to ]
Quote | Reply
Very slick design. Perhaps in the future you could figure out a way to integrate a tail light into the box!
Quote Reply
Re: Cervelo P-Series frame triangle storage solution [GreenPlease] [ In reply to ]
Quote | Reply
Nice! Will it work for a 51cm P5?
Quote Reply
Re: Cervelo P-Series frame triangle storage solution [toddm72478] [ In reply to ]
Quote | Reply
I think you'll want to reply to yannb above me.
Quote Reply
Re: Cervelo P-Series frame triangle storage solution [[Nor]mann] [ In reply to ]
Quote | Reply
I am interested too. I have access to 3d printers. Would love on for my 2015 NP3. One question - how do I adjust the dimensions of the printed object based on the frame size?

Next races on the schedule: none at the moment
Quote Reply
Re: Cervelo P-Series frame triangle storage solution [yannb] [ In reply to ]
Quote | Reply
Yann, do you think it would the same size for a 56 frame?
Quote Reply
Re: Cervelo P-Series frame triangle storage solution [teixido] [ In reply to ]
Quote | Reply
teixido wrote:
Yann, do you think it would the same size for a 56 frame?


Unlikely, the height from the top of the rear wheel to the the seat clamp is going to be greater.

Take a piece of cardboard or manila folder and place it against the side of the trailing edge of the bike, trace the contour (blue lines as shown on the attached image), then place a ruler on the sketch and as accurately as you can, draw a 3 inch line next to it, I can use that for reference. Scan the drawing and post it in your response to me.

yann

http://www.custombikexcessories.com
Instagram
Facebook
Last edited by: yannb: Aug 8, 18 13:14
Quote Reply
Re: Cervelo P-Series frame triangle storage solution [yannb] [ In reply to ]
Quote | Reply
Per the above - does it work for a 51cm P5?
Quote Reply
Re: Cervelo P-Series frame triangle storage solution [toddm72478] [ In reply to ]
Quote | Reply
toddm72478 wrote:
Per the above - does it work for a 51cm P5?


Not likely since the distance between wheel and top of seat tube clamp is smaller than the 54. I am willing to update the design for the different size frames if you are willing to follow the steps I've outlined above for different sized frames.

yann

http://www.custombikexcessories.com
Instagram
Facebook
Last edited by: yannb: Aug 8, 18 13:50
Quote Reply
Re: Cervelo P-Series frame triangle storage solution [yannb] [ In reply to ]
Quote | Reply
Cool, I have a 58cm so I may take you up on your offer. I did start to work on a boss mounted option as well.

Thanks.
Quote Reply
Re: Cervelo P-Series frame triangle storage solution [ktm520] [ In reply to ]
Quote | Reply
ktm520 wrote:
Cool, I have a 58cm so I may take you up on your offer. I did start to work on a boss mounted option as well.

Thanks.

That might be tough to print, that's an extra 1.57" of height. Don't know of any printers that are inexpensive that could print at that height.

http://www.custombikexcessories.com
Instagram
Facebook
Quote Reply
Re: Cervelo P-Series frame triangle storage solution [yannb] [ In reply to ]
Quote | Reply
Sent you a PM
Quote Reply
Re: Cervelo P-Series frame triangle storage solution [toddm72478] [ In reply to ]
Quote | Reply
toddm72478 wrote:
Per the above - does it work for a 51cm P5?


I have boxes now available for the P5 in 51, 54, 56 and 58. They can be ordered on my website: http://www.custombikexcessories.com/products-1. There is about a 2 week lead time from the time you place the order and the time I ship it out to you. I am dependent on shapeways printing service to print the boxes for me. Cost is $225 which includes shipping both within the US and international. I've sold just over 30 since I started taking orders mid December.

I'm now working on a above bottom bracket box for the P5. Video of test fit of 3d printed box on my p5 56cm here: https://www.youtube.com/watch?v=apPw6axkgec. This box is huge, you can transport your kitchen sink in it :-). Price will be $250-265. I'm hoping to bring the cost down by simplifying it some, will see. I'll be making a similar box for the P3 next.

http://www.custombikexcessories.com
Instagram
Facebook
Last edited by: yannb: Jan 18, 19 12:52
Quote Reply
Re: Cervelo P-Series frame triangle storage solution [yannb] [ In reply to ]
Quote | Reply
I would definitely be interested in this, I assume it would fit on a P2 all the same since they're essentially the same?

Gone with the wind

Instagram: palmtreestriathlon
Quote Reply
Re: Cervelo P-Series frame triangle storage solution [palmtrees] [ In reply to ]
Quote | Reply
palmtrees wrote:
I would definitely be interested in this, I assume it would fit on a P2 all the same since they're essentially the same?

The P5 box will not fit on the p2/p3. The triangle is different enough that it’s not a one size fits all.

Good news is that I was able to get measurements on a 51 and a 56 p3 today for the bottom bracket area. Also was able to get measurements off the back for a rear box. Progress made today.

http://www.custombikexcessories.com
Instagram
Facebook
Quote Reply
Re: Cervelo P-Series frame triangle storage solution [yannb] [ In reply to ]
Quote | Reply
Any chance of a box for the 45cm/650c P3?
Quote Reply
Re: Cervelo P-Series frame triangle storage solution [geetee] [ In reply to ]
Quote | Reply
I'll be having the above BB box for a 51 p5 when it's ready. Any chance of a mailing list in case I miss the announcement on here?
Quote Reply
Re: Cervelo P-Series frame triangle storage solution [hutchy_belfast] [ In reply to ]
Quote | Reply
Time for everyone to put their money where their mouth is. Before I continue down the path of designing a bottom bracket box for the p2/p3, I'm taking pre-orders for the box. A lot of you have expressed interest in the box and said they would buy it in heart beat. I've already put in a lot of work on it, this shows the level of commitment on your part in purchasing a box from me. Pre-order price is $190, full price will be $225. You can pre-order on my website: https://custombikexcessories.com/...s-1?olsPage=products. I'm looking for at least 5 people to pre-order. Note I will be doing the same for the P5 bb box, will setup the pre-order page later tonight.

It should take about 3-5 weeks before the boxes are ready to ship out. Will need to do some road testing of the box to validate the functionality.

If it does not pan out for some reason. I will refund your money.

yann

http://www.custombikexcessories.com
Instagram
Facebook
Quote Reply
Re: Cervelo P-Series frame triangle storage solution [yannb] [ In reply to ]
Quote | Reply
Bonjour Yann,

You mention taking measurements for a potential P3 rear box. If it works out, I'd be interested in a size 54.

Merci et bon travail!
Elliot
Quote Reply
Re: Cervelo P-Series frame triangle storage solution [yannb] [ In reply to ]
Quote | Reply
Newer version of the P2\P3 I assume.

___________________________________________
http://en.wikipedia.org/...eoesophageal_fistula
http://en.wikipedia.org/wiki/Cerebral_palsy
2020 National Masters Champion - M40-44 - 400m IM
Canadian Record Holder 35-39M & 40-44M - 200 m Butterfly (LCM)
Quote Reply
Re: Cervelo P-Series frame triangle storage solution [yannb] [ In reply to ]
Quote | Reply
I'm interested, willing to put up cash and willing to help out with sizing, but only if you plan to make a version for the 650c-wheeled 45cm P3.
Quote Reply
Re: Cervelo P-Series frame triangle storage solution [geetee] [ In reply to ]
Quote | Reply
geetee wrote:
I'm interested, willing to put up cash and willing to help out with sizing, but only if you plan to make a version for the 650c-wheeled 45cm P3.

Are you talking about the bb box or rear box? For the bb box I’m willing to do it if people are willing to put cash up front. I’m looking for a minimum of 7 orders for the P5 and same for the p2p3. I think the rear box on the p2/p3 is not going to work due to the rear brake being in the way.

http://www.custombikexcessories.com
Instagram
Facebook
Quote Reply
Re: Cervelo P-Series frame triangle storage solution [yannb] [ In reply to ]
Quote | Reply
P3 and BB box. You're correct: the P2/P3 have a rear brake and can't use a rear-mounted box like the P5.

PM sent, thanks for your willingness to work on this.
Quote Reply

Prev Next