I may be fuzzy on this, but if you push housing though frame, remove bb cover, put housing into stop, reinstall cover, ie push into place then route housing through extensions to determine length, cut, install cables, pull cover to route through stay and up FD hole push cover back on again
easy...eh, somewhat, just tedious mostly, but better than bare cables routed through which might then cross each other if not careful. dont really care if housing crosses, wont affect anything, but cables cross effs with your shifting and it will never be right until cables not corssed, if bare
easy...eh, somewhat, just tedious mostly, but better than bare cables routed through which might then cross each other if not careful. dont really care if housing crosses, wont affect anything, but cables cross effs with your shifting and it will never be right until cables not corssed, if bare