So I have had this idea to build a brake adapter for the rear P4 brake but very much lack the skills in CAD or CNC. There are a few threads with people who may be interested, and I am sure even more people frustrated with the stock brake. So let's put our collective SlowTwitch minds together to get some of these bad boys built up.
See photo below for my measurements. Fellow P4'ers, please help to confirm.
The idea is to machine a horseshoe that bolts into the 2 brake bosses (the top 2 holes in the photo). Then, have a 3rd bolt going into the bottom of the photo hole, to add stability. Then, somewhere very close to that bottom hole of the frame, have a hole drilled out on the horseshoe to run a standard, single bolt rear brake (best options are TriRig or Magura).
Thoughts? Please share more details and opinions so we can hopefully have someone build this.
Alex Arman
Strava
See photo below for my measurements. Fellow P4'ers, please help to confirm.
The idea is to machine a horseshoe that bolts into the 2 brake bosses (the top 2 holes in the photo). Then, have a 3rd bolt going into the bottom of the photo hole, to add stability. Then, somewhere very close to that bottom hole of the frame, have a hole drilled out on the horseshoe to run a standard, single bolt rear brake (best options are TriRig or Magura).
Thoughts? Please share more details and opinions so we can hopefully have someone build this.
Alex Arman
Strava