Login required to started new threads

Login required to post replies

advantage of Torhans vs BTA
Quote | Reply
With father's day coming, my wife has asked what I would like this year. I was thinking a Torhans aero 20/30 might be a nice change from my current BTA (x-lab torpedo with standard water bottle). Is there an actual speed advantage/disadvantage to changing to the Torhans system? While it's sort of a guilt free present, I would still like to know it's sort of well spent money. Any feedback is appreciated.
Last edited by: aries33: Jun 4, 15 11:18
Quote Reply
Re: advantage of Torhans vs BTA [aries33] [ In reply to ]
Quote | Reply
aries33 wrote:
With father's day coming, my wife has asked what I would like this year. I was thinking a Torhans aero 20/30 might be a nice change from my current BTA (x-lab torpedo with standard water bottle). Is there an actual speed advantage/disadvantage to changing to the Torhans system? While it's sort of a guilt free present, I would still like to know it's sort of well spent money. Any feedback is appreciated.

If you can get the Torhans 30 very close to the head tube (I think something like 1 inch or less) it can save a whole bunch of drag. Some bikes headtubes and handle bars will make this difficult (bikes with bayonett style front ends make this way easier). ERO has said that the BTA bottle is not fool proof and most of their original tests showed increased drag with a BTA versus no BTA. They have not given away what the trick is, but if your BTA is not very well shielded by your arms and your arms are not hugging the BTA, the Torhans 30 is probably faster.

Simply: Torhans 30 positioned great is better than any BTA, but this is limited by your frame and handlebars. A Torhans 30 itself is faster than a badly positioned BTA.
Quote Reply
Re: advantage of Torhans vs BTA [chaparral] [ In reply to ]
Quote | Reply
chaparral wrote:
If you can get the Torhans 30 very close to the head tube (I think something like 1 inch or less) it can save a whole bunch of drag. Some bikes headtubes and handle bars will make this difficult (bikes with bayonett style front ends make this way easier).

On my old P2C, I can get my Torhans close, but it is so low I cannot drink from it and have any vision of the road ahead of my front wheel. If I pull the tubing up from the aero sheath a few inches (when I drink) I can see a few feet ahead when I drink (but the tubing no longer reaches the bottom so I cannot drink the whole 30 oz). Am I doing something wrong?
Quote Reply
Re: advantage of Torhans vs BTA [chaparral] [ In reply to ]
Quote | Reply
Other than that you have the weight a little lower and closer to the frame.

-shoki
Quote Reply
Re: advantage of Torhans vs BTA [aries33] [ In reply to ]
Quote | Reply
You can also get the XLAB torpedo bottle (the refillable one with the straw). Then you can swap between using that or replaceable bottles depending on the race.

http://xlab-usa.com/...ill-upgrade-kit.html

ECMGN Therapy Silicon Valley:
Depression, Neurocognitive problems, Dementias (Testing and Evaluation), Trauma and PTSD, Traumatic Brain Injury (TBI)
Quote Reply
Re: advantage of Torhans vs BTA [aries33] [ In reply to ]
Quote | Reply
Don't forget we also make a BTA, the AeroZ. The Aero 30 close to headtube can is very hard to beat though.

Hans Bielat
TorHans LLC Co-Founder, Owner, Chief Innovation Officer
http://www.torhans.com
Quote Reply
Re: advantage of Torhans vs BTA [Ted Striker] [ In reply to ]
Quote | Reply
Thanks Ted. Have most of the problems the earlier 30's had been resolved? Specifically, the mast falling off during bumpy rides and the lid leaking. Thank you for the feedback.
Quote Reply
Re: advantage of Torhans vs BTA [aries33] [ In reply to ]
Quote | Reply
I super glued mine to the bottle. No falling off now. I am still trying to figure out a way to get it a bit closer to the head tube, about 2.5 inches now. I tried a BTA but couldn't get my computer at the tip of my extensions because they're too short. I figured even though it might be a bit too far away, looking down to see my computer might be less aero than it being a bit too far from the head tube.

Twitter - Instagram
Quote Reply
Re: advantage of Torhans vs BTA [aries33] [ In reply to ]
Quote | Reply
The current Aero 20s and Aero 30s have barbed collars so the aero masts are basically fixed on there. New Aero 20s and Aero 30s will be out late summer. Details on these coming in about a month.

Hans Bielat
TorHans LLC Co-Founder, Owner, Chief Innovation Officer
http://www.torhans.com
Quote Reply
Re: advantage of Torhans vs BTA [Ted Striker] [ In reply to ]
Quote | Reply
I think I have asked this before but wanted to ask again since race season is here and I want to make sure I get the correct hydration on the front. What is the distance from the head tube to either be neutral or negative drag. I know right on the head tube is FAST but mine is about 2.5 inches away because of the bayonet stem that I have to use. I have the mount flipped upside down. I could cut off the part of the mount that is closest to the head tube to get it that much closer. I love the set up because of the amount of fluid I get but don't want to give up free watts!

Twitter - Instagram
Quote Reply
Re: advantage of Torhans vs BTA [jrielley] [ In reply to ]
Quote | Reply
Hey Jrielley,

I think we have established from all of our tests, plus athlete/third party tests that 1 inch to 11/2 inch away will be drag negative on most bikes. To expand on that, the best results are at low yaw usually. Beyond that it is mixed between slightly negative, neutral or the same as most BTA systems. If Jim@ERO is on here I know he has a plethora of Aero 30 data. And Jim has my permission to release any of our data. If you can get in closer to the head tube it wins hands down.

If you want to send me a pic of your setup at Hans@torhans.com I'm pretty creative with getting the unit closer.

Cheers,

Hans

Hans Bielat
TorHans LLC Co-Founder, Owner, Chief Innovation Officer
http://www.torhans.com
Quote Reply
Re: advantage of Torhans vs BTA [jrielley] [ In reply to ]
Quote | Reply
I don't "know" this answer based on experience, but rather reading over the information the last few days trying to find that answer myself. The number previously provided by Hans (I think) was 2 inches. I have seen some mods with the most interesting one being a guy who took the "wings" off by pushing the pins out and then put the pins back in and used zip ties instead to mount the main holder to his aero bars. He was able to get it pretty much flush by doing this. If I can find the picture again, I'll post it.

here's the link

http://forums.transitions.org.au/index.php?showtopic=57993
Last edited by: aries33: Jun 8, 15 9:52
Quote Reply
Re: advantage of Torhans vs BTA [aries33] [ In reply to ]
Quote | Reply
Exact-o knife. Soldering iron. Silicone glue. Thank you Zach Boring for the tips.



Alex Arman

Strava
Quote Reply
Re: advantage of Torhans vs BTA [Ted Striker] [ In reply to ]
Quote | Reply
Ok thanks! I will try to get a pic tonight and send it over to you. I love the ease of the set up because the straw is right there. Would love to keep it if possible.

Twitter - Instagram
Quote Reply
Re: advantage of Torhans vs BTA [Ted Striker] [ In reply to ]
Quote | Reply
Hans recently started using the 30 and love it. The one thing I'm thinking of switching is the side I mount the aero tray on. Rather than have it behind the bottle I was thinking of flipping it to be out front and then using a little tape to stabilize it. In your opinion would moving the tray to the front to mount a 910 have a negative impact on the bottles air flow? I would just like to have a better view of my data. Thanks in advance for any feedback.
Quote Reply
Re: advantage of Torhans vs BTA [aries33] [ In reply to ]
Quote | Reply
Good question, and I was wondering the same thing.
I have the mount flipped, so it rests under the aero bars and allows me to get the bottle lower, and closer to the head tube.
I also used a zip tie to attach the aero tray on the opposite side of the bottle so that it extends out front and gives me a better view of my Garmin....but was wondering if I was giving up watts with this configuration.
Quote Reply
Re: advantage of Torhans vs BTA [aries33] [ In reply to ]
Quote | Reply
We get this question a lot. It is the reason we did not stick a mount on the front of our AeroZ. There is no definitive answer. It would depend on how wide your aero extensions are and your arm/hand position relative to the placement of the Garmin. Wide extensions I would say yes, putting a unit in front of an airfoil will have additional drag, however I cannot quantify it without testing.

Hans Bielat
TorHans LLC Co-Founder, Owner, Chief Innovation Officer
http://www.torhans.com
Quote Reply
Re: advantage of Torhans vs BTA [doublea334] [ In reply to ]
Quote | Reply
Well any tips for doing that using a P5-6 traditional (Aduro low-mount) cockpit? This is exactly what I would like to have (it looks fantastic on your bike), but with the Aduro and these collars it looks difficult.

From what I read the Torhans 30 would be choice #1 closely followed by Torhans 30.
Quote Reply
Re: advantage of Torhans vs BTA [doublea334] [ In reply to ]
Quote | Reply
doublea334 wrote:
Exact-o knife. Soldering iron. Silicone glue. Thank you Zach Boring for the tips.


That may be the best setup of a P5-6 I've seen. That bottle is giving you at least 7-8 watts savings fit to the bike like that - maybe closer to 10. Well done!

Jim Manton / ERO Sports
Quote Reply
Re: advantage of Torhans vs BTA [doublea334] [ In reply to ]
Quote | Reply
WELL DONE SIR! Love it. About to make bottle 2.0.

I gave Heather Wurtele the original at IMTX

Hopefully they or I/you will get to test it
Quote Reply
Re: advantage of Torhans vs BTA [Baboonator] [ In reply to ]
Quote | Reply
I got the tip from Zach Boring on these forums, who also helped Team Wurtele to mount his/her Torhans super close to the P5-6 with Aduro.

https://twitter.com/...s/599294620393078784




I lined up the bottle as close as possible, then started to exact-O cut the bottle to match the shape. Once it was cut down, I took a soldering iron to melt on plastic from a regular water bottle to now re-seal my modified Torhans. Then it was a matter of filling with water, check for leaks, and solder some more. Then, for good measure, I put a nice clean coating of food grade silicone sealant around the edges.
Again, another piece of advice from Mr. Boring. I certainly want to give credit where credit is due.


One soldering tip I can provide, if you go this route, is to line up the 2 pieces of plastic you plan to join, then melt a "trench" right at the seam. This will melt both the Torhans plastic and the new bottle plastic. From there, melt over plastic from both sides of the seam to fill the "trench" and smooth off.


I had ZERO soldering experience before this, but love to tinker. Took me about 4 hours in total work time to get it all down.

Alex Arman

Strava
Last edited by: doublea334: Jun 11, 15 9:55
Quote Reply
Re: advantage of Torhans vs BTA [Jim@EROsports] [ In reply to ]
Quote | Reply
Jim@EROsports wrote:
doublea334 wrote:


That may be the best setup of a P5-6 I've seen. That bottle is giving you at least 7-8 watts savings fit to the bike like that - maybe closer to 10. Well done!

P5-3 ;)

The Magura brake fairing is OEM from the P5-6. But the "beard" is a shaped piece of aluminum, tip taken from Caroline Steffen's brass beard to fit around the 3T adjustable stem.

Alex Arman

Strava
Quote Reply
Re: advantage of Torhans vs BTA [doublea334] [ In reply to ]
Quote | Reply
Okay, now you're just making my day. Do you have more photos of that set up?

Jim Manton / ERO Sports
Quote Reply
Re: advantage of Torhans vs BTA [doublea334] [ In reply to ]
Quote | Reply
doublea334 wrote:
Exact-o knife. Soldering iron. Silicone glue. Thank you Zach Boring for the tips.


What is the clearance there? I just got an aero 30 for my cannondale slice, and with my cockpit height I am looking at literally a sliver over 1/4" of height. Not sure this is good/optimal/bad...

It also looks like I am going to be learning how to use a soldering iron :)

Brent

DFRU - Detta Family Racing Unit...the kids like it and we all get out and after it...gotta keep the fam involved!
Quote Reply
Re: advantage of Torhans vs BTA [doublea334] [ In reply to ]
Quote | Reply
Sounds like you got the technique down well. I found that easiest as well. Also, good tip on the extra water bottle. I had used some VR bottle plastic I had left over from my VR mod on the P3 (see below, aero 30 wasn't fully latched down here, hence the look of the gap) and it reached it's transition temperature higher than the aero 30. Made for some patience. Don't use bento anymore

Overall, this isn't hard. You just need patience. And I appreciate the credit ;) Doubt I'm the first to do this though.


Last edited by: zachboring: Jun 11, 15 10:14
Quote Reply
Re: advantage of Torhans vs BTA [dfru] [ In reply to ]
Quote | Reply
The clearance is pretty tight. I run 22mm Conti Attacks, which gives me a bit more, but the under side of the bottle has been smoothed due to some wheel rub over bumps.

But the new Scott Plasma and old nose-cone Shiv wrap around the tire very tightly. So there has to be something to it ;)

Alex Arman

Strava
Quote Reply
Re: advantage of Torhans vs BTA [doublea334] [ In reply to ]
Quote | Reply
doublea334 wrote:
The clearance is pretty tight. I run 22mm Conti Attacks, which gives me a bit more, but the under side of the bottle has been smoothed due to some wheel rub over bumps.

But the new Scott Plasma and old nose-cone Shiv wrap around the tire very tightly. So there has to be something to it ;)

THAT is a really good point! This may take a bit of tinkering but I am determined to make it work!

Thanks!

Brent

DFRU - Detta Family Racing Unit...the kids like it and we all get out and after it...gotta keep the fam involved!
Quote Reply
Re: advantage of Torhans vs BTA [zachboring] [ In reply to ]
Quote | Reply
But now the question is how did you mod this (originally made for) Felt bottle in there? Is that a custom holder?
Quote Reply
Re: advantage of Torhans vs BTA [Baboonator] [ In reply to ]
Quote | Reply
I made it custom :)

My soldering iron is very tired and used now
Quote Reply
Re: advantage of Torhans vs BTA [zachboring] [ In reply to ]
Quote | Reply
Does anyone have success with the VR set up on a 2014 Speed Concept?
Quote Reply
Re: advantage of Torhans vs BTA [Jim@EROsports] [ In reply to ]
Quote | Reply
Really? That's a very large marginal gain. What I don't get is if that sort of the shape at the front end saves so much why aren't be seeing drag/yaw charts for the Plasma 5 showing it beats everything?
Quote Reply
Re: advantage of Torhans vs BTA [zamm0] [ In reply to ]
Quote | Reply
Jim, is it because of firms tending to want to keep head tubes within UCI limits that there's not been an evolution towards that p5-3 & Torhans sort of shape at the front?
Quote Reply
Re: advantage of Torhans vs BTA [Ted Striker] [ In reply to ]
Quote | Reply
Also considering an Aero20.. Do you know if there will be a problem installing on the Pro Missile Evo bar/extensions?

The bar's stem extends pretty far and I'm not sure the Aero20 can fit without really placing the bottle far forward.. here's a pic of the bars:




Last edited by: 125mph: Jun 21, 15 19:04
Quote Reply
Re: advantage of Torhans vs BTA [125mph] [ In reply to ]
Quote | Reply
You can indeed install an Aero 20 on the Pro missile bars. However, you need to place the Aeromount between the extensions and not on top of. Make a 'U' with the mount, wings up. Also, since the missile extensions are not round placing extra foam, rubber, straw tubing etc. between the extensions and mounted is needed.

Hans Bielat
TorHans LLC Co-Founder, Owner, Chief Innovation Officer
http://www.torhans.com
Quote Reply
Re: advantage of Torhans vs BTA [Ted Striker] [ In reply to ]
Quote | Reply
Ted Striker wrote:
The current Aero 20s and Aero 30s have barbed collars so the aero masts are basically fixed on there. New Aero 20s and Aero 30s will be out late summer. Details on these coming in about a month.

Hi Ted,

Just wanted to follow-up, any news about these new and improved aero 30s? My take on your post is that they will fit better on integrated bikes like the P5-6. Is that it? If so, why are you waiting so long to take my monies?
Quote Reply
Re: advantage of Torhans vs BTA [Ted Striker] [ In reply to ]
Quote | Reply
Hi Ted, have you considered extending the lower portion of the Aero30 more so that it can get closer to head tubes? Or provide a plastic wrap piece which can be cut to size...I've been thinking of just wrapping a piece of plastic around the bottom of the Aero30 until it is almost touching the head tube.

Ted Striker wrote:
The current Aero 20s and Aero 30s have barbed collars so the aero masts are basically fixed on there. New Aero 20s and Aero 30s will be out late summer. Details on these coming in about a month.
Quote Reply
Re: advantage of Torhans vs BTA [EnderWiggan] [ In reply to ]
Quote | Reply
I can say they have at least thought about it. I have no clue if they are going to incorporate it or not.
Quote Reply
Re: advantage of Torhans vs BTA [zachboring] [ In reply to ]
Quote | Reply
Is it about closeness to stem or the head tube? Are the watts savings gained by just getting as close to possible to the stem?
Quote Reply
Re: advantage of Torhans vs BTA [EnderWiggan] [ In reply to ]
Quote | Reply
Close to headtube.

You are essentially making a deeper airfoil
Quote Reply
Re: advantage of Torhans vs BTA [zachboring] [ In reply to ]
Quote | Reply
Thanks Zach, this is what I thought. I'm thinking I can just buy a piece of black thin plastic, cut it, wrap it around the torhans and extend the lower part of the torhans bottle as close as I want to the head tube :)

zachboring wrote:
Close to headtube.

You are essentially making a deeper airfoil
Quote Reply
Re: advantage of Torhans vs BTA [EnderWiggan] [ In reply to ]
Quote | Reply
Potentially. Obviously it is not sure fire faster as you will likely change the shape of the Torhans shape.
Quote Reply
Re: advantage of Torhans vs BTA [zachboring] [ In reply to ]
Quote | Reply
while we are on the subject of the torhans - i have the 20 - what is this sponge method that keeps it from splashing?
Quote Reply
Re: advantage of Torhans vs BTA [Baboonator] [ In reply to ]
Quote | Reply
[
Hi Ted,

Just wanted to follow-up, any news about these new and improved aero 30s? My take on your post is that they will fit better on integrated bikes like the P5-6. Is that it? If so, why are you waiting so long to take my monies?[/quote]
The shape of the 20 and 30 will stay the same. However, that isn't to say we won't do another integrated vertical bottle in the future. The changes with the 20 and 30 are an entirely new fill door making the unit fully sealed. Similar to the AeroZ. Also a bite valve, much longer straws.

Hans Bielat
TorHans LLC Co-Founder, Owner, Chief Innovation Officer
http://www.torhans.com
Quote Reply
Re: advantage of Torhans vs BTA [Ted Striker] [ In reply to ]
Quote | Reply
Is the new lid going to be transferable to the old units? Anticipated release timeframe/goal?
Quote Reply
Re: advantage of Torhans vs BTA [zachboring] [ In reply to ]
Quote | Reply
Yes they will be. ETA is a Kona launch.

Hans

Hans Bielat
TorHans LLC Co-Founder, Owner, Chief Innovation Officer
http://www.torhans.com
Quote Reply
Re: advantage of Torhans vs BTA [Jim@EROsports] [ In reply to ]
Quote | Reply
I was able to get my aero30 bottle cut down and pretty close to the head tube (just over a half inch). My question is whether this is going to be more aero than a BTA solution and or how much savings am I potentially looking at here? Are there some things I could clean up?[/img][/img][/img]
Quote Reply
Re: advantage of Torhans vs BTA [jsamples53] [ In reply to ]
Quote | Reply
I have a cervelo p2. I'm interested in the aero 30 but am not the type of person to start welding, exacto
Knifing etc. can I still get this close enough to headset to get that watt savings?
Quote Reply
Re: advantage of Torhans vs BTA [Ted Striker] [ In reply to ]
Quote | Reply
Ted Striker wrote:
Yes they will be. ETA is a Kona launch.

Hans

Hi Hans,

Any updates on the Aero20/30 sealed top?

Alex Arman

Strava
Quote Reply
Re: advantage of Torhans vs BTA [doublea334] [ In reply to ]
Quote | Reply
Yes, in testing and production. Will be available before start of 2016 season.

Hans Bielat
TorHans LLC Co-Founder, Owner, Chief Innovation Officer
http://www.torhans.com
Quote Reply
Re: advantage of Torhans vs BTA [Ted Striker] [ In reply to ]
Quote | Reply
Ted Striker wrote:
Yes, in testing and production. Will be available before start of 2016 season.

What's the story with the new Aero 30 bottle that doesn't leak? Was this ever released?
Quote Reply
Re: advantage of Torhans vs BTA [chrisgrigsby] [ In reply to ]
Quote | Reply
Anyone???
Quote Reply
Re: advantage of Torhans vs BTA [chrisgrigsby] [ In reply to ]
Quote | Reply
I'll be putting out a video of the new Aero 20/30 in the next 2 weeks or so, also sending to other publications for review

Hans Bielat
TorHans LLC Co-Founder, Owner, Chief Innovation Officer
http://www.torhans.com
Quote Reply
Re: advantage of Torhans vs BTA [Ted Striker] [ In reply to ]
Quote | Reply
Thanks Ted, when will it be available to order?
Quote Reply
Re: advantage of Torhans vs BTA [doublea334] [ In reply to ]
Quote | Reply
Okay, I'm going to resurrect this. I've decided to go back to a vertical bottle after many years with BTA. I managed to get an Aero 30 for £20 on ebay, and wondered how I was going to get it closer to the headtube. I have very narrow extensions, so I can literally plonk it between them in the top groove and secure with several zip-ties. My limiter is it's against the stem, so I was thinking either cut it as your method, or try and reshape it using a heat gun. If I goof either method, a new one will be £50. My Google-fu brought me here.

Do you have any pics of your modified bottle? Thanks.

29 years and counting
Quote Reply
Re: advantage of Torhans vs BTA [Jorgan] [ In reply to ]
Quote | Reply
Here's an old pic of the completed bottle. I have since moved on to a new bike and no longer use the bottle.

I'm posting these from my phone, so sorry if they are embedding wonky.









Alex Arman

Strava
Quote Reply
Re: advantage of Torhans vs BTA [doublea334] [ In reply to ]
Quote | Reply
Many thanks!

29 years and counting
Quote Reply