Login required to started new threads

Login required to post replies

Re: Official FIT ASSISTANCE for Canyon Speedmax CF and CF SLX [MicNichol]
I originally posted this in the Speedmax CF owners thread - https://forum.slowtwitch.com/forum/?post=6649465 - but should have posted here in the first place....

Here's the short version.

I recently purchased a size large 2019 Speedmax CF 8.0 SL. I’m trying to get the fit dialed in but having a problem with pad stack.

I currently have the front end in the stock configuration, 25mm spacer under stem and all risers between base bar and pads/extensions. The extensions are sitting at a 20 degree angle. In this configuration I’m measuring pad stack of ~683-685mm. The size large geometry is supposed to have an upper pad stack limit of 714mm. Can anybody think of why this would be the case? I now have 3 calls into Canyon support over the past 1.5 weeks. They continue mentioning they will get back to me but > 1 week for a basic question seems pretty concerning to me. This past weekend I had my bike mechanic double check my measurements to make sure I wasn't doing something stupid, sure enough ~685mm is what he measured.

Does anybody know for 100% certain the geometry numbers on Canyon US website are for the 2019 bike with PD subsonic setup vs the 2018 T4+ setup?

Prior to purchasing the bike I had a professional fit by an ST recommended fitter in my area. I also posted in this exact thread a couple of times confirming sizing. I also confirmed sizing with Canyon via phone. Quite unfortunate to find myself in this situation so hoping someone can point me in the right direction before this bike goes back to Canyon.

Thanks in advance.

Last edited by: twheat18: May 13, 19 13:59

Edit Log:

  • Post edited by twheat18 (Big Pines) on May 13, 19 13:58
  • Post edited by twheat18 (Big Pines) on May 13, 19 13:59