Can anyone confirm that this mod can be done on a P2? Is the construction of the TT/HT/DT junction the same on the P2 as the P3?
I've got the Jagwire cable stops (# CHA056) from another project and I'm itching to try it. I'm thinking about bonding a short length of housing the end of the cable stops to rout the cable around the bend inside the frame. A few inches should be enough to clear the bend. I think this is preferable to running full cable liner (like the TriRig mod), which would add more cable drag. Any problems with this idea?
ETA: Also, cable housing wouldn't wear out nearly as quickly as liner. I'd be worried about the cable sawing it's way through the liner and into the carbon.
I bought the frame used, so no concern about voiding the warranty!
CodyBeals.com | Instagram | TikTok
ASICS | Ventum | Martin's | HED | VARLO | Shimano | 4iiii | Keystone Communications
I've got the Jagwire cable stops (# CHA056) from another project and I'm itching to try it. I'm thinking about bonding a short length of housing the end of the cable stops to rout the cable around the bend inside the frame. A few inches should be enough to clear the bend. I think this is preferable to running full cable liner (like the TriRig mod), which would add more cable drag. Any problems with this idea?
ETA: Also, cable housing wouldn't wear out nearly as quickly as liner. I'd be worried about the cable sawing it's way through the liner and into the carbon.
I bought the frame used, so no concern about voiding the warranty!
CodyBeals.com | Instagram | TikTok
ASICS | Ventum | Martin's | HED | VARLO | Shimano | 4iiii | Keystone Communications