For any of you with experience dealing with this -
I'm planning to upgrade an entry level road bike that was a Sora/2200 commuter bike to a capable training or even racing Shimano 105 groupset bike.
I already have a race-ready Cervelo 2008 P2C with the original 10spd Dura-Ace derailleurs/shifters, and I also bought a Wheelbuilder Powertap-laced rear wheel for it several years ago.
I was hoping to have interchangeable parts, especially the powertap wheel, but turns out the current-gen Shimano 105 is an 11-spd setup, not the 10-spd of my Cervelo.
What is the best, most cost-effective way of trying to get these two bikes to have parts/wheels that work together? I'd hate to have to buy a whole new 11-spd groupset & wheel for the Cervelo. (I think wheelbuilder has a 10 to 11spd adapter for the powertap, but it's $100 on its own!)
To add further complications to the mix, my Kickr is setup for the 10spd cassette, if that matters at all.
Any tips in keeping these two bikes and powertap wheel 'parts compatible' short of buying 2 entire new groupsets and an entire new powertap wheel, would be welcome.
I'm planning to upgrade an entry level road bike that was a Sora/2200 commuter bike to a capable training or even racing Shimano 105 groupset bike.
I already have a race-ready Cervelo 2008 P2C with the original 10spd Dura-Ace derailleurs/shifters, and I also bought a Wheelbuilder Powertap-laced rear wheel for it several years ago.
I was hoping to have interchangeable parts, especially the powertap wheel, but turns out the current-gen Shimano 105 is an 11-spd setup, not the 10-spd of my Cervelo.
What is the best, most cost-effective way of trying to get these two bikes to have parts/wheels that work together? I'd hate to have to buy a whole new 11-spd groupset & wheel for the Cervelo. (I think wheelbuilder has a 10 to 11spd adapter for the powertap, but it's $100 on its own!)
To add further complications to the mix, my Kickr is setup for the 10spd cassette, if that matters at all.
Any tips in keeping these two bikes and powertap wheel 'parts compatible' short of buying 2 entire new groupsets and an entire new powertap wheel, would be welcome.