Login required to started new threads
Login required to post replies
I am building a 2016 ceepo viper and the customer wants a dura ace 9110 rear brake. After installing a Pioneer dura ace crankset, the non drive crank arm contacts the rear brake. I shimmed out the non drive side crank so that the pioneer equipment would not contact the brake. I was wondering how much clearance would be sufficient and how wide can you space out a dura ace crankset?
I couldn't fine very much information on the Shimano website.
Thanks
You may want to contact Ceepo's North American contact. Marc-Andre Perron, he is with Drivetrain Sports.
m_aperrone@hotmail.com
marcandre.perrin.58 on Messanger.
-Of course it's 'effing hard, it's IRONMAN!
Team ZOOT
ZOOT, QR, Garmin, HED Wheels, Zealios, FormSwim, Precision Hydration, Rudy Project
Unfortunately, the system won't work. Shimano Crank, Pioneer, and Shimano Brake.
You need to swap out the brake for a TRP Model T851. It's the only solution.
Tell Ed sorry about that!
Steven Harad
215.359.6964
thank you
I just told him lets look into a TRP brake