Slowtwitch Forums: User Profile: CruseVegas

A: Saddle height	820
B: Plumb line, saddle nose to BB	-73
C: Cockpit (nose to extension tip)	900
D: Armrests to extension tip	357
E: Armrests drop	-118
F: Saddle nose to armrest back	555
G: Armrest width	165
Comments:
Purchased January 2012 Saddle mount bolt to BB 765 mm Saddle position on bracket 30 showing behind saddle bracket Saddle angle @ Bracket nose down 1 degree Aero Bars tilt up @ 19 degrees using the extension ****************************************************** 2/16/2012 changed angle on aero bar @ Extensions to 7 degrees from the 19 ************************** 4/9/2012 updates moved Armrest width from 195 to 150 Lowered stack from 140 to 157 the left extension I moved out/longer just a bit and have it twisted to the inside. ******************************************* 4/22/2012 Moved saddle down 5mm BB to Saddle clamp 760 and backwards 5mm changed saddle angle from 1 degree down in front to 2 degree down in front. Saddle is set in the front on x of Max and the back clamp is set on the 2. re-measured and updated all measurements here. Twisted the right extension in just a bit, not as much as the left one. Rode 30 miles today after doing the changes and I think it's better than before. *************************** ********************************* 2012/05/01 Moved 7mm of spacers from above the stem to below it. There is on 10mm spacer left above the stem. ******************************* 2012 06 22 put the bike back together after it's return from Kona. moved the arm pads in one notch/hole. will measure them later.

Hide